FZT869 Green 25V NPN HIGH CURRENT TRANSI STOR IN SOT223 Features Mechanical Data BV > 25V Case: SOT223 CEO I = 7A High Continuous Collector Current Case Material: Molded Plastic. Green Molding Compound. C I = 20A Peak Pulse Current UL Flammability Rating 94V-0 CM Very Low Saturation Voltage V < 110mV 1A Moisture Sensitivity: Level 1 per J-STD-020 CE(SAT) R = 36m at 5A for a Low Equivalent On-Resistance Terminals: Finish - Matte Tin Plated Leads. CE(SAT) e3 h Specified Up to 20A for a High Gain Hold Up Solderable per MIL-STD-202, Method 208 FE P = 3W Weight: 0.112 grams (Approximate) TOT Lead-Free Finish RoHS Compliant (Notes 1 & 2) Halogen and Antimony Free. Green Device (Note 3) Qualified to AEC-Q101 Standards for High Reliability SOT223 C B E Top View Top View Device Symbol Pin-Out Ordering Information (Note 4) Product Compliance Marking Reel Size (inches) Tape Width (mm) Quantity per Reel FZT869TA AEC-Q101 FZT869 7 12 1,000 Notes: 1. EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. All applicable RoHS exemptions applied. 2. See FZT869 Absolute Maximum Ratings ( T = +25C, unless otherwise specified.) A Characteristic Symbol Value Unit Collector-Base Voltage V 60 V CBO Collector-Emitter Voltage 25 V V CEO Emitter-Base Voltage 6 V V EBO Continuous Collector Current 7 A I C Peak Pulse Current 20 A I CM Thermal Characteristics ( T = +25C, unless otherwise specified.) A Characteristic Symbol Value Unit 3 (Note 5) Power Dissipation 24 W P D Linear Derating Factor mW/C 1.6 (Note 6) 12.8 (Note 5) R 42 JA Thermal Resistance, Junction to Ambient (Note 6) R 78 C/W JA Thermal Resistance Junction to Lead (Note 7) R 8.8 JL Operating and Storage Temperature Range T T -55 to +150 C J, STG ESD Ratings (Note 8) Characteristic Symbol Value Unit JEDEC Class Electrostatic Discharge - Human Body Model ESD HBM 4,000 V 3A Electrostatic Discharge - Machine Model ESD MM 400 V C Notes: 5. For a device mounted with the collector lead on 52mm x 52mm 2oz copper that is on a single-sided 1.6mm FR4 PCB device is measured under still air conditions whilst operating in steady-state. 6. Same as note (5), except the device is mounted on 25mm x 25mm 1oz copper. 7. Thermal resistance from junction to solder-point (at the end of the collector lead). 8. Refer to JEDEC specification JESD22-A114 and JESD22-A115. 2 of 7 FZT869 March 2017 Diodes Incorporated www.diodes.com Document Number DS33178 Rev. 4 - 2