FZT948 Green 20V PNP MEDIUM POWER TRANSISTOR IN SOT223 Features Mechanical Data BV > -20V CEO Case: SOT223 I = -6A High Continuous Collector Current C Case Material: Molded Plastic. Green Molding Compound. I = -20A Peak Pulse Current CM UL Flammability Rating 94V-0 Low Saturation Voltage V CE(SAT) Moisture Sensitivity: Level 1 per J-STD-020 h Specified up to -20A for a High Gain Hold-up FE Terminals: Finish - Matte Tin Plated Leads. Solderable per MIL- Lead-Free Finish RoHS Compliant (Notes 1 & 2) e3 STD-202, Method 208 Halogen and Antimony Free. Green Device (Note 3) Weight: 0.112 grams (Approximate) Qualified to AEC-Q101 Standards for High Reliability C SOT223 B E Top View Top View Device Symbol Pin-Out Ordering Information (Note 4) Product Compliance Marking Reel Size (inches) Tape Width (mm) Quantity per Reel FZT948TA AEC-Q101 FZT948 7 12 1,000 Notes: 1. EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. All applicable RoHS exemptions applied. 2. See FZT948 Absolute Maximum Ratings ( T = +25C, unless otherwise specified.) A Characteristic Symbol Value Unit Collector-Base Voltage V -40 V CBO Collector-Emitter Voltage V -20 V CEO Emitter-Base Voltage -7 V V EBO Continuous Collector Current I -6 A C Peak Pulse Current I -20 A CM Thermal Characteristics ( T = +25C, unless otherwise specified.) A Characteristic Symbol Value Unit 3.0 (Note 5) Power Dissipation 24 W P D Linear Derating Factor 1.6 mW /C (Note 6) 12.8 (Note 5) R 42 JA Thermal Resistance, Junction to Ambient (Note 6) R 78 C/W JA Thermal Resistance Junction to Lead (Note 7) R 8.84 JL Operating and Storage Temperature Range -55 to +150 C TJ, TSTG ESD Ratings (Note 8) Characteristic Symbol Value Unit JEDEC Class Electrostatic Discharge - Human Body Model ESD HBM 4,000 V 3B Electrostatic Discharge - Machine Model ESD MM 400 V C Notes: 5. For a device mounted with the collector lead on 52mm x 52mm 2oz copper that is on a single-sided 1.6mm FR4 PCB device is measured under still air conditions whilst operating in steady-state. 6. Same as Note 5, except the device is mounted on 25mm x 25mm 1oz copper. 7. Thermal resistance from junction to solder-point (at the end of the collector lead). 8. Refer to JEDEC specification JESD22-A114 and JESD22-A115. 2 of 7 FZT948 April 2017 Diodes Incorporated www.diodes.com Document number: DS33189 Rev. 4 - 2