Green FZT958 400V PNP MEDIUM POWER TRANSISTOR IN SOT223 Features Mechanical Data Case: SOT223 BV > -400V CEO Case Material: Molded Plastic. Green Molding Compound. UL I = -0.5A High Continuous Collector Current C Flammability Rating 94V-0 I = -1.5A Peak Pulse Current CM Moisture Sensitivity: Level 1 per J-STD-020 Low Saturation Voltage V < -400mV -0.5A CE(SAT) Terminals: Finish - Matte Tin Plated Leads. Solderable per MIL- h Specified up to -2A for a High Gain Hold-Up FE STD-202, Method 208 Lead-Free Finish RoHS Compliant (Notes 1 & 2) Weight: 0.112 grams (Approximate) Halogen and Antimony Free. Green Device (Note 3) Qualified to AEC-Q101 Standards for High Reliability C SOT223 B E Top View Top View Device Symbol Pin-Out Ordering Information (Note 4) Part Number Compliance Marking Reel Size (inches) Tape Width (mm) Quantity Per Reel FZT958TA AEC-Q101 FZT958 7 12 1,000 Notes: 1. EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. All applicable RoHS exemptions applied. 2. See FZT958 Absolute Maximum Ratings ( T = +25C, unless otherwise specified.) A Characteristic Symbol Value Unit Collector-Base Voltage -400 V V CBO Collector-Emitter Voltage -400 V V CEO Emitter-Base Voltage V -7 V EBO Continuous Collector Current I -0.5 A C Peak Pulse Current I -1.5 A CM Thermal Characteristics ( T = +25C, unless otherwise specified.) A Characteristic Symbol Value Unit 3.0 (Note 5) Power Dissipation 24 W P D Linear Derating Factor mW/C 1.6 (Note 6) 12.8 (Note 5) R 42 JA Thermal Resistance, Junction to Ambient (Note 6) 78 C/W R JA Thermal Resistance, Junction to Lead (Note 7) 8.8 R JL Operating and Storage Temperature Range T T -55 to +150 C J, STG ESD Ratings (Note 8) Characteristic Symbol Value Unit JEDEC Class 3B Electrostatic Discharge - Human Body Model ESD HBM 8,000 V C Electrostatic Discharge - Machine Model ESD MM 400 V Notes: 5. For a device mounted with the collector lead on 52mm x 52mm 2oz copper that is on a single-sided 1.6mm FR-4 PCB device is measured under still air conditions whilst operating in steady-state. 6. Same as Note 5, except the device is mounted on 25mm x 25mm 1oz copper. 7. Thermal resistance from junction to solder-point (at the end of the collector lead). 8. Refer to JEDEC specification JESD22-A114 and JESD22-A115. 2 of 7 FZT958 December 2016 Diodes Incorporated www.diodes.com Document number: DS36166 Rev. 6 - 2