A Product Line of Diodes Incorporated ZTX758 400V PNP MEDIUM POWER HIGH VOLTAGE TRANSISTOR IN E-LINE Features Mechanical Data BV > -400V Case: E-Line (TO-92 Compatible) CEO I = -0.5A High Continuous Collector Current Case Material: molded plastic, Green Molding Compound C I = -1A Peak Pulse Current UL Flammability Classification Rating 94V-0 CM T up to +200C for High Temperature Operation Terminals: Finish Matte Tin Plated Leads, Solderable per J Low Saturation Voltage < -0.25V -50mA MIL-STD-202, Method 208 P = 1W Power dissipation Weight: 0.159 grams (approximate) D Totally Lead-Free & Fully RoHS compliant (Notes 1 & 2) Halogen and Antimony Free. Green Device (Note 3) Qualified to AEC-Q101 Standards for High Reliability E-Line Part Mark on (TO-92 Compatible) Rounded Face C Ejection Mark C B E on Flat Face B Bottom View E C B C B E E Rounded Face View Flat Face View Device Symbol Pin-Out Configuration Ordering Information (Notes 4) Part Number Compliance Marking Case Leads Quantity ZTX758 AEC-Q101 ZTX758 E-Line Straight 4,000 loose in a Box ZTX758STZ AEC-Q101 ZTX758 E-Line Joggled 2,000 taped per Ammo Box Notes: 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. 2. See A Product Line of Diodes Incorporated ZTX758 Absolute Maximum Ratings ( T = +25C, unless otherwise specified.) A Characteristic Symbol Value Unit Collector-Base Voltage -400 V V CBO Collector-Emitter Voltage -400 V V CEO Emitter-Base Voltage -7 V V EBO Continuous Collector Current I -0.5 A C Peak Pulse Current I -1 A CM Thermal Characteristics ( T = +25C, unless otherwise specified.) A Characteristic Symbol Value Unit Power Dissipation (Note 5) 1.5 W P D Power Dissipation (Note 6) 1 W P D Thermal Resistance Junction to Ambient (Note 5) R 116 C/W JA Thermal Resistance Junction to Ambient (Note 6) R 175 C/W JA Thermal Resistance Junction to Lead (Note 7) R 70 C/W JL Operating and Storage Temperature Range T T -55 to +200 C J, STG ESD Ratings (Note 8) Characteristic Symbol Value Unit JEDEC Class Electrostatic Discharge - Human Body Model ESD HBM 4,000 V 3A C Electrostatic Discharge - Machine Model ESD MM 400 V Notes: 5. For a through-hole device mounted at the seating plane (2.5mm lead length) with the collector lead on 25mm x 25mm 1oz copper that is on a single-sided FR4 PCB device is measured under still air conditions whilst operating in a steady-state. 6. Same as note (5), except the device is mounted on minimum recommended pad layout with 12mm lead length from the bottom of package to the board. 7. Thermal resistance from junction to solder-point at the seating plane (2.5mm from the bottom of package along the collector lead). 8. Refer to JEDEC specification JESD22-A114 and JESD22-A115. 2 of 7 August 2013 ZTX758 Diodes Incorporated www.diodes.com Document number: DS33299 Rev. 2 - 2