A Product Line of Diodes Incorporated ZXT13P40DE6 40V PNP LOW SATURATION SWITCHING TRANSISTOR IN SOT26 Features Mechanical Data BV > -40V Case: SOT26 CEO I = -3A Max Continuous Collector Current Case Material: Molded Plastic, Green Molding Compound C I = -10A Peak Pulse Current UL Flammability Classification Rating 94V-0 CM R = 58m for a Low Equivalent On-Resistance Moisture Sensitivity: Level 1 per J-STD-020 CE(SAT) Low Saturation Voltage (-200mV max 1A) Terminals: Finish Matte Tin Plated Leads Solderable per MIL- h Characterized up to -5A for High Current Gain Hold-Up STD-202, Method 208 FE Totally Lead-Free & Fully RoHS compliant (Notes 1 & 2) Weight: 0.015 grams (Approximate) Halogen and Antimony Free. Green Device (Note 3) Qualified to AEC-Q101 Standards for High Reliability PPAP Capable (Note 4) C SOT26 B E Top View Device Symbol Pin-Out Top Ordering Information (Notes 4 & 5) Product Compliance Marking Reel size (inches) Tape width (mm) Quantity per reel ZXT13P40DE6TA AEC-Q101 P40D 7 8 3,000 ZXT13P40DE6QTA Automotive P40D 7 8 3,000 Notes: 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. 2. See A Product Line of Diodes Incorporated ZXT13P40DE6 Absolute Maximum Ratings ( T = +25C, unless otherwise specified.) A Characteristic Symbol Value Unit Collector-Base Voltage -50 V V CBO Collector-Emitter Voltage -40 V V CEO Emitter-Base Voltage V -7.5 V EBO Base Current I -500 mA B Continuous Collector Current I -3 A C Peak Pulse Collector Current I -10 A CM Thermal Characteristics ( T = +25C, unless otherwise specified.) A Characteristic Symbol Value Unit 1.1 (Note 6) 8.8 Power Dissipation W P D Linear Derating Factor mW/C 1.7 (Note 7) 13.6 (Note 6) 113 Thermal Resistance, Junction to Ambient R JA (Note 7) 73 C/W Thermal Resistance, Junction to Lead (Note 8) 18.6 R JL Operating and Storage Temperature Range -55 to +150 C T , T J STG ESD Ratings (Note 9) Characteristic Symbol Value Unit JEDEC Class Electrostatic Discharge - Human Body Model ESD HBM 4,000 V 3A Electrostatic Discharge - Machine Model ESD MM 400 V C Notes: 6. For a device mounted with collector leads on 25mm x 25mm 1oz copper that is on a single-sided 1.6mm FR4 PCB device is measured under still air conditions whilst operating in a steady-state. 7. Same as Note 6, except the device is measured at t 5secs. 8. Thermal resistance from junction to solder-point (at the end of the collector leads). 9. Refer to JEDEC specification JESD22-A114 and JESD22-A115. 2 of 7 March 2015 ZXT13P40DE6 Diodes Incorporated www.diodes.com Document Number: DS33639 Rev: 5 - 2 ADVANCE INFORMATION