ZXT951KQ
Green
60V PNP LOW SATURATION MEDIUM POWER TRANSISTOR
Description Features
This Bipolar Junction Transistor (BJT) is designed to meet the BV > -60V
CEO
stringent requirements of Automotive Applications. R = 53m Typical
SAT
Continuous Collector Current I = -6A
C
Up to -15A Peak Current
Low Equivalent On Resistance
Low Saturation Voltage
High Gain Holds Up (100 Min @ -2A)
Lead-Free Finish; RoHS compliant (Note 1 & 2)
Halogen and Antimony Free. Green Device (Note 3)
Qualified to AEC-Q101 Standards for High Reliability
PPAP Capable (Note 4)
Application Mechanical Data
DC-DC Converters
Case: TO252 (DPAK)
Power Switches
Case Material: Molded Plastic,Gree Molding Compound.
Motor Control
UL Flammability Classification Rating 94V-0
Automotive Circuits
Moisture Sensitivity: Level 1 per J-STD-020
Inverter Circuits
Terminals: Finish Matte Tin; Solderable per MIL-STD-202,
Method 208
Weight: 0.34 grams (Approximate)
TO252 (DPAK)
Pin Out Configuration
Top View Device Schematic
Top view
Ordering Information (Notes 4 & 5)
Product Compliance Marking Reel Size (inches) Tape Width (mm) Quantity per Reel
ZXT951KQTC Automotive ZXT951 13 16 2,500
Notes: 1. EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. All applicable RoHS exemptions applied.
2. See
ZXT951KQ
Absolute Maximum Ratings (@T = +25C, unless otherwise specified.)
A
Characteristic Symbol Value Unit
Collector-Base Voltage BV -100 V
CBO
Collector-Base Voltage BV -100 V
CER
Collector-Emitter Voltage V -60 V
CEO
Emitter-Base Voltage V -7 V
EBO
Continuous Collector Current I -6 A
C
Base Current -0.5 A
I
B
Peak Pulse Collector Current -15 A
I
CM
Thermal Characteristics (@T = +25C, unless otherwise specified.)
A
Characteristic Symbol Value Unit
(Note 6) 2.1
Power Dissipation (Note 7) P 3.2 W
D
(Note 8) 4.2
(Note 6) 59
Thermal Resistance, Junction to Ambient Air (Note 7) R 39 C/W
JA
(Note 8) 30
Thermal Resistance, Junction to Leads (Note 9) 1.77 C/W
R
JL
Operating and Storage Temperature Range -55 to +150 C
T T
J, STG
ESD Ratings (Note 10)
Characteristic Symbol Value Unit JEDEC Class
Electrostatic Discharge Human Body Model ESD HBM 8,000 V 3B
Electrostatic Discharge Machine Model ESD MM 400 V C
Notes: 6. For the device mounted on 25mm x 25mm x 1.6mm FR4 PCB with high coverage of single sided 1oz copper, in still air conditions.
7. For the device mounted on 50mm x 50mm x 1.6mm FR4 PCB with high coverage of single sided 1oz copper, in still air conditions
8. For the device mounted on 25mm x 25mm x 1.6mm FR4 PCB with high coverage of single sided 2oz copper, in still air conditions
9. Thermal resistance from junction to solder-point (at the end of the collector lead)
10. Refer to JEDEC specification JESD22-A114 and JESD22-A115.
2 of 7
ZXT951KQ September 2016
Diodes Incorporated
www.diodes.com
Document number: DS38410 Rev. 1 - 2