A Product Line of Diodes Incorporated Green ZXT953K 100V PNP LOW SATURATION MEDIUM POWER TRANSISTOR Features Mechanical Data BV > -100V Case: TO252 (DPAK) CEO I = -5A Continuous Collector Current Case Material: Molded Plastic,Gree Molding Compound C I = -10A Peak Collector Current UL Flammability Classification Rating 94V-0 CM R = 67m Typical for Low Equivalent On Resistance Moisture Sensitivity: Level 1 per J-STD-020 SAT Low Saturation Voltage Terminals: Finish Matte Tin Solderable per MIL-STD-202, High Gain Hold-Up (100 min 1A ) Method 208 Lead-Free Finish RoHS Compliant (Note 1 & 2) Weight: 0.34 grams (Approximate) Halogen and Antimony Free. Green Device (Note 3) Qualified to AEC-Q101 Standards for High Reliability Application DC-DC Converters Power Switches Motor Control Automotive Circuits Inverter Circuits TO252 Top View Device Schematic Pin Out Configuration Top view Ordering Information (Note 4) Product Compliance Marking Reel size (inches) Tape width (mm) Quantity per reel ZXT953KTC AEC-Q101 ZXT953 13 16 2,500 Notes: 1. EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. All applicable RoHS exemptions applied. 2. See A Product Line of Diodes Incorporated ZXT953K Absolute Maximum Ratings ( T = +25C, unless otherwise specified.) A Characteristic Symbol Value Unit Collector-Base Voltage -140 V BV CBO Collector-Base Voltage -140 V BV CER Collector-Emitter Voltage -100 V V CEO Emitter-Base Voltage -7 V V EBO Continuous Collector Current I -5 A C Base Current I -0.5 A B Peak Pulse Collector Current I -10 A CM Thermal Characteristics ( T = +25C, unless otherwise specified.) A Characteristic Symbol Value Unit (Note 5) 2.1 Power Dissipation (Note 6) P 3.2 W D (Note 7) 4.2 (Note 5) 59 Thermal Resistance, Junction to Ambient Air (Note 6) 39 C/W R JA (Note 7) 30 Thermal Resistance, Junction to Leads (Note 8) R 1.8 C/W JL Operating and Storage Temperature Range T T -55 to +150 C J, STG ESD Ratings (Note 9) Characteristic Symbol Value Unit JEDEC Class Electrostatic Discharge - Human Body Model ESD HBM 4,000 V 3A Electrostatic Discharge - Machine Model ESD MM 400 V C Notes: 5. For a device mounted with the exposed collector pad on 25mm x 25mm 1oz copper that is on a single-sided 1.6mm FR4 PCB device is measured under still air conditions whilst operating in a steady-state. 6. Same as Note 5, except the device is mounted on 50mm x 50mm with 1oz copper. 7. Same as Note 5, except the device is mounted on 50mm x 50mm with 2oz copper. 8. Thermal resistance from junction to solder-point (at the end of the collector lead). 9. Refer to JEDEC specification JESD22-A114 and JESD22-A115. 2 of 7 ZXT953K June 2015 Diodes Incorporated www.diodes.com Document number: DS33643 Rev. 2 - 2