ZXTN19060CG Green 60V NPN MEDIUM POWER LOW SATURATION TRANSISTOR IN SOT223 Features Mechanical Data BV > 60V Case: SOT223 CEO I = 7A Continuous Collector Current Case Material: Molded Plastic. Green Molding Compound. C I = 12A Peak Pulse Current UL Flammability Rating 94V-0 CM Low Saturation Voltage V < 50mV 1A Moisture Sensitivity: Level 1 per J-STD-020 CE(sat) R = 30m Terminals: Finish - Matte Tin Plated Leads. CE(sat) h Specified up to 7A for High Gain Hold Up Solderable per MIL-STD-202, Method 208 FE Complementary PNP Type: ZXTP19060CG Weight: 0.112 grams (Approximate) Lead-Free Finish RoHS Compliant (Notes 1 & 2) Halogen and Antimony Free. Green Device (Note 3) Applications Qualified to AEC-Q101 Standards for High Reliability Line Switching Motor Driving (including DC fans) High-Side Switches Lamp, Relay and Solenoid Drive SOT223 Pin-Out Top View Device Schematic Top View Ordering Information (Note 4) Part Number Marking Reel size (inches) Tape width (mm) Quantity per reel ZXTN19060CGTA ZXTN19060C 7 12 1,000 Notes: 1. EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. All applicable RoHS exemptions applied. 2. See ZXTN19060CG Absolute Maximum Ratings ( T = +25C, unless otherwise specified.) A Characteristic Symbol Value Unit Collector-Base Voltage 160 V VCBO Collector-Emitter Voltage 60 V V CEO Emitter-Base Voltage 7 V V EBO Continuous Collector Current 7 A I C Peak Pulse Current 12 A I CM Thermal Characteristics ( T = +25C, unless otherwise specified.) A Characteristic Symbol Value Unit 3.0 (Note 5) Power Dissipation 24 W P D Linear Derating Factor mW/C 1.6 (Note 6) 12.8 (Note 5) 42 R JA Thermal Resistance, Junction to Ambient (Note 6) R 78 C/W JA Thermal Resistance, Junction to Lead (Note 7) 8.8 R JL Operating and Storage Temperature Range T T -55 to +150 C J, STG ESD Ratings (Note 8) Characteristic Symbol Value Unit JEDEC Class Electrostatic Discharge - Human Body Model ESD HBM 4,000 V 3A Electrostatic Discharge - Machine Model ESD MM 400 V C Notes: 5. For a device mounted with the collector lead on 52mm x 52mm 2oz copper that is on a single-sided 1.6mm FR4 PCB device is measured under still air conditions whilst operating in steady-state. 6. Same as Note 5, except the device is mounted on 25mm x 25mm 1oz copper. 7. Thermal resistance from junction to solder-point (at the end of the collector lead). 8. Refer to JEDEC specification JESD22-A114 and JESD22-A115. 2 of 7 ZXTN19060CG November 2015 Diodes Incorporated www.diodes.com Document number: DS33682 Rev. 2 - 2