ZXTN2010GTA Diodes Incorporated

ZXTN2010G Green 60V NPN MEDIUM POWER LOW SATURATION TRANSISTOR SOT223 Features Mechanical Data BV > 60V Case: SOT223 CEO I = 6A Continuous Collector Current Case Material: Molded Plastic. Green Molding Compound C I = 20A Peak Pulse Current UL Flammability Rating 94V-0 CM Low Saturation Voltage V < 60mV Max 1A Moisture Sensitivity: Level 1 per J-STD-020 CE(SAT) R = 35m I =6A for Low Equivalent On-Resistance Terminals: Finish - Matte Tin Plated Leads Solderable per SAT c MIL-STD-202, Method 208 h Specified up to 10A for High Gain Hold Up FE Lead-Free Finish RoHS Compliant (Notes 1 & 2) Weight: 0.112 grams (Approximate) Halogen and Antimony Free. Green Device (Note 3) Qualified to AEC-Q101 Standards for High Reliability Applications Emergency Lighting Circuits Motor Driving (Including DC Fans) Solenoid, Relay and Actuator Drivers DC Modules Backlight Inverters SOT223 Device Schematic Pin-Out Top View Top View Ordering Information (Note 4) Part Number Marking Reel size (inches) Tape width (mm) Quantity per reel ZXTN2010GTA ZXTN2010 7 12 1,000 Notes: 1. EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. All applicable RoHS exemptions applied. 2. See ZXTN2010G Absolute Maximum Ratings ( T = +25C, unless otherwise specified.) A Characteristic Symbol Value Unit Collector-Base Voltage V 150 V CBO Collector-Emitter Voltage V 60 V CEO Emitter-Base Voltage V 7 V EBO Continuous Collector Current I 6 A C Peak Pulse Current I 20 A CM Thermal Characteristics ( T = +25C, unless otherwise specified.) A Characteristic Symbol Value Unit 3.0 (Note 5) 24 Power Dissipation W P D Linear Derating Factor 1.6 mW/C (Note 6) 12.8 (Note 5) 42 R JA Thermal Resistance, Junction to Ambient (Note 6) 78 C/W R JA Thermal Resistance, Junction to Lead (Note 7) 8.8 R JL Operating and Storage Temperature Range -55 to +150 C T T J, STG ESD Ratings (Note 8) Characteristic Symbol Value Unit JEDEC Class Electrostatic Discharge - Human Body Model ESD HBM 4,000 V 3A Electrostatic Discharge - Machine Model ESD MM 400 V C Notes: 5. For a device mounted with the collector lead on 52mm x 52mm 2oz copper that is on a single-sided 1.6mm FR4 PCB device is measured under still air conditions whilst operating in steady-state. 6. Same as Note 5, except the device is mounted on 25mm x 25mm 1oz copper. 7. Thermal resistance from junction to solder-point (at the end of the collector lead). 8. Refer to JEDEC specification JESD22-A114 and JESD22-A115. 2 of 7 ZXTP2010G December 2015 Diodes Incorporated www.diodes.com Document number: DS33660 Rev. 3 - 2