A Product Line of Diodes Incorporated Green ZXTP2013G 100V PNP MEDIUM POWER LOW SATURATION TRANSISTOR IN SOT223 Features Mechanical Data BV > -100V Case: SOT223 CEO I = -5A High Continuous Collector Current Case Material: Molded Plastic. Green Molding Compound C I = -10A Peak Pulse Current UL Flammability Rating 94V-0 CM Low Saturation Voltage V < -90mV -1A Moisture Sensitivity: Level 1 per J-STD-020 CE(SAT) R = 60m for a Low Equivalent On-Resistance Terminals: Finish - Matte Tin Plated Leads Solderable per MIL- SAT h Specified Up to -10A for a High Gain Hold-Up STD-202, Method 208 FE Lead-Free Finish RoHS Compliant (Notes 1 & 2) Weight: 0.112 grams (Approximate) Halogen and Antimony Free. Green Device (Note 3) Qualified to AEC-Q101 Standards for High Reliability Application Motor Driving Line Switching High Side Switches Subscriber Line Interface Cards (SLIC) C SOT223 B E Top View Top View Device Symbol Pin-Out Ordering Information (Note 4) Product Compliance Marking Reel size (inches) Tape width (mm) Quantity per reel ZXTP2013GTA AEC-Q101 ZXTP2013 7 12 1,000 Notes: 1. EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. All applicable RoHS exemptions applied. 2. See A Product Line of Diodes Incorporated ZXTP2013G Absolute Maximum Ratings ( T = +25C, unless otherwise specified.) A Characteristic Symbol Value Unit Collector-Base Voltage -140 V V CBO Collector-Emitter Voltage -100 V V CEO Emitter-Base Voltage -7 V V EBO Continuous Collector Current -5 A I C Peak Pulse Current I -10 A CM Thermal Characteristics ( T = +25C, unless otherwise specified.) A Characteristic Symbol Value Unit Power Dissipation (Note 5) 3.0 W P D Linear Derating Factor 24 mW/C Power Dissipation (Note 6) 1.6 W P D Linear Derating Factor 12.8 mW/C Thermal Resistance, Junction to Ambient (Note 5) R 42 C/W JA Thermal Resistance, Junction to Ambient (Note 6) R 78 C/W JA Thermal Resistance Junction to Lead (Note 7) R 10.48 C/W JL Thermal Resistance Junction to Case (Note 8) R 13.8 C/W JC Operating and Storage Temperature Range T T -55 to +150 C J, STG ESD Ratings (Note 9) Characteristic Symbol Value Unit JEDEC Class Electrostatic Discharge - Human Body Model ESD HBM 4,000 V 3A Electrostatic Discharge - Machine Model ESD MM 400 V C Notes: 5. For a device mounted with the collector lead on 52mm x 52mm 2oz copper that is on a single-sided 1.6mm FR4 PCB device is measured under still air conditions whilst operating in steady-state. 6. Same as Note 5, except the device is mounted on 25mm x 25mm 1oz copper. 7. Thermal resistance from junction to solder-point (at the end of the collector lead). 8. Thermal resistance from junction to top of the case. 9. Refer to JEDEC specification JESD22-A114 and JESD22-A115. ZXTP2013G 2 of 7 May 2015 Diodes Incorporated Datasheet Number: DS33714 Rev. 3 - 2 www.diodes.com