ES1030QI Enpirion

Enpirion Power Datasheet ES1030QI Power Rail Sequencer Features Description The ES1030QI Power Rail Sequencer is a low-power Four enable outputs and small-form factor device ideal for establishing the Four power good feedback signals power sequencing pattern in small to large multi-rail power systems (please refer to Figure 6). The part Can be chained with additional devices to achieve provides nested sequencing of four outputs per >16 sequenced rails device, with the ability to attach additional devices in Precise, adjustable qualification time for sequenced a sequencing chain for at least 16 outputs. A simple resistor divider establishes a precise qualification time supplies (33us to 8.04ms) window by determining if each power rail is valid at Aggregate PG signal for the logical AND of the the correct time. The part uses power good signals individual PG signals from the regulators to provide feedback of valid power. Separate fault I/O signals and aggregate PG Wide 1.8 V to 5.0 V nominal voltage range signals further enhance the utility of this device. The Low power consumption sequencer is available in a 2mm x 3mm STQFN Pb-free/ RoHS compliant package, optimal for use in dense systems. Halogen-free STQFN-20 package Pin Assignments Figure 1: ES1030QI Pin Assignments 1 www.altera.com/enpirion 10778 September 16, 2016 Rev C ES1030QI Datasheet Ordering Information PART NUMBER PACKAGE MARKINGS T RATING (C) PACKAGE DESCRIPTION AMBIENT -40 to +85 20-pin ( 2mm x 3mm x 0.55 mm) ES1030QI S1030 QFN T&R (3000) EVB-ES1030QI QFN evaluation board Packing and Marking Information: www.altera.com/support/reliability/packing/rel-packing-and-marking.html Pin Description PIN NAME TYPE FUNCTION 1 VDD PWR Supply voltage 2 nFAULT IN Digital input Digital input without Schmitt Trigger Input 3 nFAULT O Digital output Open-drain NMOS 4 OE4 Digital output Push pull 5 OE3 Digital output Push pull 6 PG3 Digital input Digital input without Schmitt Trigger Input 7 PG4 Digital input Digital input without Schmitt Trigger Input 8 ACNTL Analog input/output Analog input/output 9 NEXT O Digital output Push pull 10 NEXT IN Digital input Digital input with Schmitt Trigger Input 11 GND GND G r ound 12 PG1 Digital input Digital input without Schmitt Trigger Input 13 PG2 Digital input Digital input without Schmitt Trigger Input 14 OE2 Digital output Push pull 15 OE1 Digital output Push pull 16 POR Digital output Push pull 17 ALL PG Digital output Push pull 18 REF O Analog input/output Analog input/output 19 OE O Digital output Push pull 20 EN Digital input Digital input without Schmitt Trigger Input Absolute Maximum Ratings CAUTION: Absolute Maximum ratings are stress ratings only. Functional operation beyond the recommended operating conditions is not implied. Stress beyond the absolute maximum ratings may impair device life. Exposure to absolute maximum rated conditions for extended periods may affect device reliability. PARAMETER MIN MAX UNITS NOTES V to GND -0.3 7 V Open Drain output nFLT O. HIGH Voltage at input pins -0.3 7 V Current at input pin -1.0 1.0 mA Storage temperature range -65 150 C Junction temperature -- 150 C Thermal Characteristics PARAMETER MIN MAX UNITS SYMBOL TYP Operating Junction Temperature T -40 +125 C J Operating Ambient Temperature T -40 +25 +85 C A Thermal Resistance: Junction to Ambient 70 C/W JA Thermal Resistance: Junction to Case 45 C/W JC 2 www.altera.com/enpirion 10778 September 16, 2016 Rev C