Thermal Overcurrent Circuit Breakers 2-5000/2-5700-... Description Single pole thermal circuit breaker with press-to-reset, tease-free, trip-free, snap action mechanism. Type 2-5000 is available with optional manual release (-H), type 2-5700 can be supplied as a push- push switch/circuit breaker (R-type TO CBE to EN 60934 in press-to- reset configuration M-type when fitted with manual release -H S- type with push-push operation). Fitted with flange or threadneck for panel mounting. Options include an additional unprotected circuit tap (-A3). Approved to CBE standard EN 60934 (IEC 60934). 1 Typical applications Motors, transformers, solenoids, battery chargers, power supplies, 2-5000-... 2-5700-... appliances, machinery, extra low voltage systems. Ordering information Technical data Type No. Voltage rating AC 250 V DC 28 V 2-5000 flange mounting (UL: AC 250 V DC 50 V) 2-5700 threadneck panel mounting Current rating range 0.05...25 A (hardware bulk shipped) Threadneck design type 2-5700 only Typical life 5,000 operations at 2 x I N iG1 moulded threadneck 3/8 -27UNS-2A Ambient temperature -20...+60 C (-4...+140 F) iG2 moulded threadneck M12x1 Insulation co-ordination rated impulse pollution Terminal design (IEC 60664 and 60664 A) withstand voltage degree P10 blade terminals 6.3-0.8 mm (QC .250) 2.5 kV 2 K10 screw terminals M4x6 reinforced insulation in operating area Shunt terminal (optional) -P10 only Dielectric strength A3 shunt terminal (up to I 2.5 A/6 A max. load) N (IEC 60664 and 60664A) test voltage Manual release (optional) operating area AC 3,000 V H manual release facility (type 2-5000 only) DD push to release/push to reset (type 2-5700 only) Insulation resistance > 100 M (DC 500 V) Current ratings Interrupting capacity I 0.05...2.5 A 8 x I cn N 0.05...25 A 3... 5 A 20 x I N 6...12 A 200 A 2-5700 -iG1 - P10 - .. - DD - 8 A ordering example (higher interrupting capacity available to special order) The exact part number required can be built up from the table of choices shown 13...25 A 400 A above. Ordering references for optional features should be omitted if not required. Interrupting capacity I U N N (UL 1077) 0.05...20 A AC 250 V 2,000 A 0.05...25 A DC 50 V 2,000 A Degree of protection operating area IP40 (IEC 60529/DIN 40050) terminal area IP00 Vibration 8 g (57-500 Hz) 0.61 mm (10-57 Hz), to IEC 60068-2-6, test Fc, 10 frequency cycles/axis Shock 25 g (11 ms) Standard current ratings and typical internal resistance values to IEC 60068-2-27, test Ea Corrosion 96 hours at 5 % salt mist, Current Internal Current Internal to IEC 60068-2-11, test Ka rating (A) resistance ( ) rating (A) resistance ( ) Humidity 240 hours at 95 % RH 0.05 280 3 0.1 to IEC 60068-2-3, test Ca 0.08 100 3.5 0.06 Mass approx. 29 g 0.1 110 4 0.06 0.2 29 4.5 0.05 0.3 14 5 0.05 0.4 7 6 0.02 0.5 4.9 7 0.02 Approvals 0.6 3.4 8 0.02 0.7 2.5 10 < 0.02 Authority Voltage ratings Current ratings 0.8 1.8 12 < 0.02 VDE (EN 60934) AC 250 V DC 28 V 0.05...25 A 1 1.2 13 < 0.02 CSA/ UL AC 250 V DC 50 V 0.05...20 A 1.2 0.8 15 < 0.02 Semko (EN 60934) AC 250 V DC 28 V 0,05...25 A 1.5 0.6 16 < 0.02 SEV AC 250 V DC 28 V 0,05...25 A 1.8 0.4 20 < 0.02 Type 2-5700 only: 2 0.3 22 < 0.02 LRoS AC 250 V DC 28 V 0.1 ...25 A 2.5 0.2 25 < 0.02 BV AC 250 V DC 28 V 0.2 ...25 A Issue G 103 Germany (0 91 87) 10-0 - USA (847) 827-7600 - UK (01296) 420336 - www.e-t-a.comThermal Overcurrent Circuit Breakers 2-5000/2-5700-... Dimensions Terminal design 2-5000-P10 -P10-A3 -K10 0.05...2.5 A 9.5 13.5 .374 .531 14 32 14 32 1 13 .512 flat head screw M4x6 ISO1580 tightening torque 1.2 Nm A 14 32 Installation drawings 19.8 14.5 .780 .571 2-5000-P10 31 blade terminal DIN 46244-A6.3-0.8 1.22 (QC .250) current rating in A operating area 2-5000-P10-A3 0.05...2.5 A 5 14 32 40 1.57 13 50 .512 1.97 A 14 32 2-5700-P10 mounting area 3 iG1= / -27UNS-2A tightening torque max. 1 Nm 8 iG2=M12x1 tightening torque max. 1.5 Nm 6.5 .256 2-5700-P10 operating area A A 14 32 14 32 blade terminal DIN 46244-A6.3-0.8 19.8 14.5 mounting area (QC .250) .780 .571 1 1 29 .039 .039 1.14 D-shaped threadneck current rating in A for standard (-DD version without push button marking) mounting hole 5 SW 14 .551 iG1=9.6 -0.1 iG2=12.2 -0.1 iG1=.378 -.004 iG2=.480 -.004 mm This is a metric design and millimeter dimensions take precedence ( ) inch 104 Issue G Germany (0 91 87) 10-0 - USA (847) 827-7600 - UK (01296) 420336 - www.e-t-a.com iG1=8.8 iG2=11.3 OFF 22.5 5 iG1=.346 .886 .197 iG2=.445 16.5 ON .650 46.5 10 10.4 .394 .409 1.83 4.5 10.4 12.2 ON .177 .409 .480 18.5 44 18.2 OFF .728 1.73 .717 7 .276 iG1=8.9 -0.1 iG2=11.5 -0.1 iG1=.350 -.004 iG2=. 453 -.004 25 .984 10.4 .409 25 .984 max. 2.5 max. 2.5 max .098 max .098