Simulator switch, magnetic operation 9510-... Description Single pole, magnetic simulator switch with extremely low trip current and precise trip behavior. Available with threadneck mounting or flange mounting. Actuation is via a push-pull mechanism. Push button marking for simulation of various current ratings is optionally available as marking insert (plug-in, exchangeable) or marking label. Terminal designs include blade terminals, screw terminals or wire wrap terminals. Optionally available with auxiliary contact. US patent number: US 7,038,562 B1 Typical application 1 9510-... 9510-... with Flight Simulators auxiliary contact Ordering information Technical data Type No. 9510 switch with magnetic instantaneous trip for flight simulators Voltage rating (Other DC 24 V DC 28 V Mounting method and style voltage ratings upon G threadneck mounting with standard push button request) Threadneck design Trip current < 170 mA < 200 mA 1 M12x1x6.3 2 7/16-32UNx6.3 < 25 ms < 25 ms Trip time Number of poles Min. switching voltage 1 single pole at +23 C/+73.4 F DC 22 V DC 25 V Accessories for threadneck at +60 C/+140 F DC 24 V DC 28 V 2 hex nut M12x1, aluminium, serrated lock washer 12.1/17.2, fitted 3 hex nut 7/16-32UN, aluminium, Internal resistance approx. 153 approx. 153 serrated lock washer 11.3/14.9, fitted Terminal configuration Rated voltage DC 28 V / AC 5 V (400 Hz) J screw terminals with inch thread auxiliary circuit 1 6-32UNC-2B, silver plated bent 45 inwards Rated load, 3 6-32UNC-2B, silver plated, with socket, bent 45 inwards auxiliary circuit P blade terminals at DC 28 V 1 A6.3x0.8 DIN 46244, silver plated 0,5 A resistive at DC 28 V W wire wrap terminal 0,2 A lamp load at AC 5 V (400 Hz) 4 pin size 1.2x1.2 EN 60352-1, gold plated, with socket 0,24 A lamp load at DC 5 V 0,005 A minimum load Rated voltage F0 DC 24 V Typical life without auxiliary contact: F1 DC 28 V 10 000 operations at rated voltage Accessories (terminal screws) with auxiliary contact: B Phillips screw 6-32UNC-2Ax4.8 fitted 5 000 operations at rated voltage (MS 51957-25) Temperature range -30 C ...60 C (-22...+140 F) Z without accessories Accessories (terminal washers) Insulation resistance > 100 M (DC 500 V) 0 without accessories 2 3.6 split washer fitted (MS 35338-136) Dielectric strength AC 1500 V main terminal to main Internal circuit (leakage current < 1mA) terminal, main circuit open R2 with logic diode AC 800 V terminal to terminal, Colour of the push button auxiliary circuit open S black AC 1500 V main cir cuit to main circuit A green, for marking insert B black, for marking insert Degree of protection operating area IP40 (IEC 60529) terminal area IP00 0 without marking 1 hot-stamped marking, can be Vibration (sinusoidal) x axis, y axis: read when locating pin is 3 g (57-500 Hz), +-0.23 mm (10-57 Hz) above to DIN IEC 60068-2-6, test Fc 9 without marking insert 10 cycles/frequency axis Auxiliary contact versions: z axis: blank: no auxiliary 2 g (57-500 Hz), +-0.23 mm (10-57 Hz) contact (standard) to DIN IEC 60068-2-6, test Fc S1 with auxiliary contact 10 cycles/frequency axis (female contact for male Shock 5 g (11 ms), contacts to EN 3155-016 to DIN IEC 60068-2-27, test Ea M2018) S5 with polarized auxiliary Humidity 240 hours at 95 % RH, 40 C contact (female contact to DIN IEC 60068-2-3, test Ca for male contacts to EN Mass 23 g without accessories 3155-016 M2018) 26 g with accessories Current ratings approx. 27 g with auxiliary contact, 0.5...150 A without accessories 9510 - G 2 1 3 - J 1 F1 - B 0 R2 S 1 - S1 - 5 A ordering example approx. 30 g with auxiliary contact, Please be informed that we have minimum ordering quantities to be with accessories observed. 2010 www.e-t-a.de 1max .079 max .079 max 2 max. 2 z Simulator switch, magnetic operation 9510-... Dimensions Other main terminal designs -P1 9510-G-J1..-B2.... tightening torque max. 3.5 Nm blade terminal M12x1 or DIN 46244-A6.3-0.8 (QC .250) 7/16-32UN-2A THD 10 plug-in terminals 17 6.3 .394 8.4 .669 .248 black or .331 green white hex nut -J3 lock washer 1 terminal screw 6-32UNC-2A x 4.8/.189 (MS 51957-25) 8 with lock washer 15 .315 I LINE 2 10 (MS 35338-136) .591 plug-in/pull-out terminal .394 module (max. 10 times) tightening torque max. 1 Nm terminal screw 6-32UNC-2A x 4.8/.189 8 15 (MS 51957-25) .315 -W4 .591 with lock washer (MS 35338-136) plug-in terminals tightening torque: max. 0.8 Nm factory mounted wire wrap pin 1.2 x 1.2 /.047 x .047 max. 0.4 Nm mounted by customer EN 60352-1 plug-in/pull-out terminal module (max. 10 times) 12.7 1.2 .047 .500 10 mounting holes .394 +0.15 3.2 9.5 +.006 .126 .374 locating pin Internal connection diagram current rating in A 19.5 thickness 1.5 - 3 mm internal circuit R 2 .768 .059 - .118 in. 2 - 9510-G-J1..-B0....-S1... 9510 with auxiliary contact + line I auxiliary contact, female contact for with auxiliary contact with polarized auxiliary contact male contacts to EN 3155-016 M2018 2 12 2 3 max. 6,5 19,5 14,2 - - All standard terminal options are available with Auxiliary Contact version. Other dimensions see type 9510 without auxiliary contact + + LINE 111 LINE 15 mm This is a metric design and millimeter dimensions take precedence ( ) inch 2 www.e-t-a.de 2010 45 45 SW14 (M12x1) SW12.7(7/16-32) y 14.2 x 47.5 6.35 16,20,5 .559 1.87 .250 1.5 2.5 .059 .098 13 ON .512 42.7 18.5 OFF .728 1.68 +0.2 12.5 (M12x1) +0.2 11.5 (7/16-32) +.008 .492 (M12x1) +.008 3.5 .453 (7/16-32) .138 0.2 9.5 .008 .374 15.6 .614 6.8 9.5 3.6 .268 .374 .142