ITR9702-F Everlight

Technical Data Sheet Opto Interrupter ITR9702-F Features Fast response time High analytic Cut-off visible wavelength p=940nm High sensitivity Pb free This product itself will remain within RoHS compliant version Descriptions The ITR9702-F consist of an infrared emitting diode and an NPN silicon phototransistor, encased side-by-side on converging optical axis in a black thermoplastic housing, The phototransistor receives radiation from the IR LED only .This is the normal situation. But when an object is in between , phototransistor could not receives the radiation. For additional component information , please refer to IR928-6C-F and PT928-6C-F Applications Mouse Copier Switch Scanner Floppy disk driver Non-contact Switching For Direct Board Device Selection Guide Device No. Chip Material LENS COLOR IR928-6C-F GaAlAs Water clear PT928-6C-F Silicon Water clear Everlight Electronics Co., Ltd. ITR9702-F Package Dimensions Notes: 1.All dimensions are in millimeters 2.Tolerances unless dimensions 0.2mm 3.Lead spacing is measured where the lead emerge from the package 4.Above specification may be changed without notice. EVERLIGHT will reserve authority on material change for above specification 5.These specification sheets include materials protected under copyright of EVERLIGHT corporation . Please dont reproduce or cause anyone to reproduce them without EVERLIGHTs consent 6.When using this product , please observe the absolute maximum ratings and the instructions for use outlined in these specification sheets. EVERIGHT assumes no responsibility for any damage resulting from use of the product which does not comply with the absolute maximum ratings and the instructions included in these specification sheets. Everlight Electronics Co., Ltd.