46
SERIES
46 Series - Miniature industrial relays 8 - 16 A
Features 46.52 46.61
1 & 2 Pole relay range
46.52 - 2 Pole 8 A
A
46.61 - 1 Pole 16 A
Socket mount or direct connection via Faston
connectors
AC coils & DC coils
Available with: lockable test button,
mechanical indicator & LED indicator
8 mm, 6 kV (1.2/50 s) isolation, coil-contacts
Cadmium Free contacts
2 Pole CO, 8 A 1 Pole CO, 16 A
European Patent
Plug-in/Solder terminals Plug-in/Faston 187
46.52
29 12.4
46.61
4.75 0.5 4.75
FOR UL RATINGS SEE:
General technical information page V
Contact specification
Contact configuration 2 CO (DPDT) 1 CO (SPDT)
Rated current/Maximum peak current A 8/15 16/25 * * With the AgSnO material
2
the maximum peak current is
Rated voltage/Maximum switching voltage V AC 250/440 250/440
80 A - 5 ms on normally
Rated load AC1 VA 2,000 4,000
open contact.
Rated load AC15 (230 V AC) VA 350 750
Single phase motor rating (230 V AC) kW 0.37 0.55
Breaking capacity DC1: 30/110/220 V A 6/0.5/0.15 12/0.5/0.15
300 (5/5) 300 (5/5)
Minimum switching load mW (V/mA)
Standard contact material AgNi AgNi
Coil specification
Nominal voltage (U ) V AC (50/60 Hz) 12 - 24 - 48 - 110 - 120 - 230 - 240
N
V DC 12 - 24 - 48 - 110 - 125
Rated power VA/W 1.2/0.5 1.2/0.5
Operating range AC (0.8...1.1)U (0.8...1.1)U
N N
(0.73...1.1)U (0.73...1.1)U
DC
N N
Holding voltage AC/DC 0.8U /0.4U 0.8U /0.4U
N N N N
Must drop-out voltage AC/DC 0.2U /0.1U 0.2U /0.1U
N N N N
Technical data
6 6
Mechanical life AC/DC cycles 10 10 10 10
3 3
Electrical life at rated load AC1 cycles 100 10 100 10
Operate/release time ms 10/3 15/5
Insulation between coil and contacts (1.2/50 s)kV 6 (8 mm) 6 (8 mm)
Dielectric strength between open contacts V AC 1,000 1,000
Ambient temperature range C 40 ... +70 40 ... +70
Environmental protection RT II RT II
Approvals (according to type)
1
I-2014, www.findernet.com
20
6.5 32.8E
P
O
R
U
E
N
A
46
SERIE S
46 Series - Miniature industrial relays 8 - 16 A
Ordering information
Example: 46 series Miniature industrial relay, 1 CO (SPDT), 24 V DC coil, lockable test button and mechanical indicator.
AB C D
A
46..6 1 9.02 4. 0 0 4 0
Series A: Contact material D: Special versions
0 = AgNi 0 = Standard
Type
4 = AgSnO (46.61 only)
2
5 = Spade/blade solder terminal C: Options
5 = AgNi + Au
(2.5x0.5)mm 2 =Mechanical indicator
6 = Spade/blade terminal 4 =Lockable test button +
B: Contact circuit
Faston 187 (4.8x0.5)mm mechanical indicator
0 = CO (nPDT)
54 =Lockable test button + LED (AC) +
No. of poles
mechanical indicator
1 = 1 pole, 16 A
74 =Lockable test button + double LED
2 = 2 poles, 8 A
(DC non-polarized) + mechanical indicator
Coil version
9 = DC
8 = AC (50/60 Hz)
Coil voltage
See coil specifications
Selecting features and options: only combinations in the same row are possible.
Preferred selections for best availability are shown in bold.
Type Coil version A B C D
46.52 AC - DC 0 - 5 0 2 - 40
AC 0 - 5 0 54 /
DC 0 - 5 0 74 /
46.61 AC - DC 0 - 4 - 5 0 2 - 40
AC 0 - 4 - 5 0 54 /
DC 0 - 4 - 5 0 74 /
Special versions for Rail Applications on request
Descriptions: Options
C: Option 54 C: Option 74
LED (AC) LED (DC, non-polarized)
2
Lockable test button and mechanical flag indicator (0040, 0054, 0074)
The dual-purpose Finder test button can be used in two ways:
3
1
Case 1) The plastic pip (located directly below the test button) remains intact. In this case, when
the test button is pushed, the contacts operate. When the test button is released the contacts return
to their former state.
Case 2) The plastic pip is broken-off (using an appropriate cutting tool). In this case, (in addition
to the above function), when the test button is pushed and rotated, the contacts are latched in
the operating state, and remain so until the test button is rotated back to its former position.
In both cases ensure that the test button actuation is swift and decisive.
2
E
P
P A TENT
O
R
U
E
I-2014, www.findernet.com
N
A