58 Series - Relay interface modules 7 - 10 A Features 58.32 58.33 58.34 2, 3 & 4 Pole relay interface modules, 27 mm wide. Ideal interface for PLC and electronic systems 58.32 - 2 Pole 10 A 58.33 - 3 Pole 10 A 58.34 - 4 Pole 7 A AC coils and DC coils Supply status indication and coil 2 pole 10 A 3 pole 10 A 4 pole 7 A suppression module as standard 35 mm rail mounting 35 mm rail mounting 35 mm rail mounting Identification label Cadmium Free contacts UL Listed 12 9 9 8 7 12 11 10 9 COM COM COM 35 mm rail (EN 50022) mounting 41 11 31 21 11 41 31 21 11 8 5 6 5 4 8 7 6 5 83 NO NO NO 44 14 34 24 14 44 34 24 14 73 27 25.9 17.5 17.5 4 1 3 2 1 4 3 2 1 NC NC NC 42 12 32 22 12 42 32 22 12 14 13 14 13 14 13 COIL COIL COIL A2 A1 A2 A1 A2 A1 + 32 Example: AC Example: DC Example: AC Contact specification 58 Contact configuration 2 CO (DPDT) 3 CO (3PDT) 4 CO (4PDT) Rated current/Maximum peak current A 10/20 10/20 7/15 Rated voltage/Maximum switching voltage V AC 250/400 250/400 250/250 Rated load AC1 VA 2,500 2,500 1,750 Rated load AC15 (230 V AC) VA 500 500 350 Single phase motor rating (230 V AC) kW 0.37 0.37 0.125 Breaking capacity DC1: 30/110/220V A 10/0.25/0.12 10/0.25/0.12 7/0.25/0.12 Minimum switching load mW (V/mA) 300 (5/5) 300 (5/5) 300 (5/5) Standard contact material AgNi AgNi AgNi Coil specification Nominal voltage (U ) V AC (50/60 Hz) 12 - 24 - 48 - 110 - 120 - 230 12 - 24 - 48 - 110 - 120 - 230 12 - 24 - 48 - 110 - 120 - 230 N V DC 12 - 24 - 48 12 - 24 - 48 12 - 24 - 48 Rated power AC/DC VA (50 Hz)/W 1.5/1 1.5/1 1.5/1 Operating range AC (0.81.1)U (0.81.1)U (0.81.1)U N N N DC (0.81.1)U (0.81.1)U (0.81.1)U N N N Holding voltage AC/DC 0.8 U /0.5 U 0.8 U /0.5 U 0.8 U /0.5 U N N N N N N Must drop-out voltage AC/DC 0.2 U /0.1 U 0.2 U /0.1 U 0.2 U /0.1 U N N N N N N Technical data 6 6 6 6 6 6 Mechanical life AC/DC cycles 20 10 /50 10 20 10 /50 10 20 10 /50 10 3 3 3 Electrical life at rated load AC1 cycles 200 10 200 10 150 10 Operate/release time ms 9/3 (AC) - 9/15 (DC) 9/3 (AC) - 9/15 (DC) 9/3 (AC) - 9/15 (DC) Insulation between coil and contacts (1.2/50 s) kV 3.6 3.6 3.6 Dielectric strength between open contacts V AC 1,000 1,000 1,000 Ambient temperature range C 40+70 40+70 40+70 Protection category IP 20 IP 20 IP 20 Approvals relay (according to type) 139 76 27.558 Series - Relay interface modules 7 - 10 A Ordering information Example: 58 series 35 mm rail (EN 55022) mounting interface module, 4 CO (4PDT), 24 V DC coil, green LED + diode. AB C D 58..3 4 9.02 4. 0 0 5 0 Series A: Contact material D: Special versions 0 = AgNi Standard 0 = Standard Type B: Contact circuit 3 = 35 mm rail mount C: Options 0 = CO (nPDT) 5 = Standard DC: green LED + diode No. of poles (polarity +A1) 2 = 2 pole, 10 A 6 = Standard AC: green LED + Varistor 3 = 3 pole, 10 A 4 = 4 pole, 7 A Coil version 8 = AC (50/60 Hz) 9 = DC Coil voltage see coil specifications Technical data Insulation Insulation according to EN 61810-1 ed. 2 insulation rated voltage V 400 (2-3 pole) 250 (4 pole) rated impulse withstand voltage kV 3.6 (2-3 pole) 2.5 (4 pole) 58 pollution degree 2 overvoltage category III Insulation between coil and contacts (1.2/50 s) kV 3.6 Dielectric strength between open contacts V AC 1,000 Dielectric strength between adjacent contacts V AC 2,000 (58.32,58.33) 1,550 (58.34) Conducted disturbance immunity Burst (5...50)ns, 5 kHz, on A1 - A2 EN 61000-4-4 level 4 (4 kV) Surge (1.2/50 s) on A1 - A2 (differential mode) EN 61000-4-5 level 4 (4 kV) Other data Bounce time: NO/NC ms 1/4 Vibration resistance (1055)Hz, max. 1 mm: NO/NC g/g 6/6 Power lost to the environment without contact current W 1 with rated current W 3 (58.32, 58.34) 4 (58.33) Wire strip length mm 8 Screw torque Nm 0.5 Max. wire size solid cable stranded cable 2 mm 1x6 / 2x2.5 1x4 / 2x2.5 AWG 1x10 / 2x14 1x12 / 2x14 140