CPRV2222A-LP Finisar

PRODUCT BRIEF 100G Integrated Coherent Receiver CPRV2b2tA OIF-DPC-RX Type 2 Key Features Fully integrated dual polarization coherent receiver: Overview Polarization beam splitter Finisars CPRV2b22A Integrated Coherent Receiver combines polarization beam splitting Optical 90 hybrids with optics for the signal and local oscillator inputs, two matched optical 90 hybrids with integrated balanced monolithically integrated balanced photodetectors, and four linear trans-impedance photodetectors amplifiers (TIAs) with differential outputs in a compact surface-mount package. At the Linear trans-impedance signal input there is a monitor photodiode for input signal monitoring, as well as a amplifiers with peak variable optical attenuator (VOA). The receiver is available in both C- and L-band versions. detector output The device separates the incoming signal in X and Y polarization channels. Optical Selectable automatic / 90 hybrids subsequently demodulate the incident signal for each polarization into its manual gain control in-phase (I) and quadrature (Q) phase channels, relative to an external local oscillator Signal monitor photodiode and laser source. The phase channels are converted to electrical signals by pairs of balanced variable optical attenuator (VOA) photodetectors that are monolithically integrated with the optical 90 hybrids, and Conforms with OIF-DPC-RX-01.2 subsequently amplified by linear trans-impedance amplifiers (TIAs). The TIAs feature implementation agreement, integrated peak detectors and support both manual and automatic gain control. Type 2 form factor The CPRV2b22A conforms to the OIF-DPC-RX-01.2 implementation agreement, Type 2 Up to 32 Gbaud symbol rate form factor. The Integrated Coherent Receiver is RoHS compliant per Directive 2011/65/EU. 25 GHz bandwidth on each lane C- and L-band version available Key Advantages Applications High responsivity 100 Gb/s DP-QPSK coherent Compact footprint transmission systems Integrated monitor photodiode and 200 Gb/s DP-16QAM coherent variable optical attenuator (VOA) transmission systems OIF MSA 100G long-haul transmission modules CFP-DCO metro transmission modules100G Integrated Coherent Receiver Block Diagram and Mechanical Dimensions 41 25 Operating Conditions Parameter Symbol Condition Min Typ Max Unit Case Temperature T 0 +75 C case Wavelength Range C-band CPRV2222A 1530 1570 nm L-band CPRV2122A 1570 1612 nm Average Optical Input Power Signal P DP-QPSK -18 0 dBm sig Supply Voltage 5 % 3.3 V 1) Optical and Electrical Specifications Parameter Symbol Condition Min Typ Max Unit Baud Rate DP-QPSK 32 Gbaud 3 dB cut-off Frequency f assuming full VGA range 25 GHz 3dB Average Photodiode Responsivity R CW single input 65 mA/W avg 2) Common Mode Rejection Ratio CMRR DC -25 dB sig e 3) Imbalance I DC 2 dB Sig 0 I DC 2 dB LO 0 Phase Deviation -7.5 +7.5 deg Optical Return Loss ORL 1550 nm 27 dB 0 Power Consumption P 1000 1600 mW con Polarization Extinction Ratio for Sig & LO PER 20 dB 0 Notes: 1) = 1550 nm, 23C 2) CMRR = 20 log(I /I ) PD PD 3) 10*log(R /R ) max min 1389 Moffett Park Drive Phone: +1-408-548-1000 Sunnyvale, CA 94089-1133 Sales: +1-408-541-5690 www.finisar.com Email: sales finisar.com 2015 Finisar Corporation. All rights reserved. Finisar is a registered trademark of Finisar Corporation. Features and specifications are subject to change without notice. 07/15 Visit Our Website 22