EVA-BPDV Finisar

Product Specification Evaluation Kit for Integrated Coherent Detector Eva-Kit BPDV PRODUCT FEATURES APPLICATIONS Evaluation kit for laboratory testing of Product evaluation BPDV modules Laboratory test systems PCB board for mechanical mounting of Interface board and DC control cable for BPDV modules optical frontend Banana plugs for laboratory access of BPDV DC control lines The evaluation kit consists of a PCB for mechanical mounting of BPDV modules and a DC connector cable. The PCB is designed to directly access the RF connector of the module package. DC control is enabled via banana connectors. The kit enables easy electrical access and full control of BPDV modules. ORDERING INFORMATION Eva-Kit BPDV is consisting of: Eva-Kit BPDV Eva-BPDV PCB board Eva-Cable-Set BPDV Confidential and Proprietary 2015 Finisar Corporation. All rights reserved Rev. A1 Page 1 Eva-Kit for Integrated Coherent Detector I. Evaluation Board The PCB evaluation board is designed for mechanical mounting of BPDV modules. Electrical connection to the module is obtained via Ni/Au finished electrical pads. Care needs to be taken for precise alignment of the package electrical leads to the pads on board. Slight bending of leads for increased spring load is suggested. The module can be fixed by 4 screws. The board is equipped with a keyed 17 pin header for connecting the DC cable. Figure 1: PCB Layout (dimensions in mm) Single-layer PCB 1.5 mm thickness Material: FR4 35 m Cu Ni/Au finish II. DC Cable The DC cable provides access to the DC pins of the BPDV module via banana plugs. Connection to the evaluation board is obtained by a 17 leads keyed connector. Each cable is labeled near the banana plug with the function of the module pin it is connected to. Confidential and Proprietary 2015 Finisar Corporation. All rights reserved Rev. A1 Page 2