HFD3141-203 Finisar

Product Specification 4.25Gbps 1310nm PIN + Preamp, LC ROSA HFD3141-203 PRODUCT FEATURES LC ROSA High performance InGaAs PIN photodiode with separate transimpedance amplifier Low electrical parasitic TO46 package Data rates from 155Mbps to 4.25Gbps A separate detector bias pin which can be used for receive power monitoring Low bias currents and voltages The HFD3141-203 use a high-performance InGaAs PIN photo-detector packaged with a transimpedance amplifier designed to meet performance requirements for data rates up to 4.25Gbps data communication over single-mode optical fiber at 1200nm to 1600nm. Applications include Ethernet, Fiber Channel and ATM protocols. The PIN is RoHS compliant 1 per Directive 2011/65/EU . PRODUCT SELECTION Part Number Description HFD3141-203 LW 5 pin LC ROSA, with separate PD bias for RSSI Finisar Corporation October 2015 Rev. B1 Page 1 HFD3141-203 Product Specification I. Absolute Maximum Ratings Parameter Rating Storage Temperature -40 to +85C Case Operating Temperature -40 to +85C Lead Solder Temperature 260C, 10 sec. Power Supply Voltage -0.5V to 4V Incident Optical Power +3 dBm average, +6 dBm peak 1 ESD Exposure (Human Body Model) 225V 1 Heel and wrist straps must be used on a properly grounded workstation Notice Stresses greater than those listed under Absolute Maximum Ratings may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operations section for extended periods of time may affect reliability. Notice The inherent design of this component causes it to be sensitive to electrostatic discharge (ESD). To prevent ESD-induced damage and/or degradation to equipment, take normal ESD precautions when handling this product Finisar Corporation October 2015 Rev. B1 Page 2