XPDCAA Finisar

PRODUCT BRIEF XFP-RF Transmitter Host System for CATV Hybrid Fiber Coaxial (HFC) Applications Key Features High-Density: 10 ports for XFP- RF transmitters in 1 rack-unit High-density chassis for pluggable 1.2GHz high chassis wavelength-tunable XFP-RF transmitters Compliant with DOCSIS 3.1 with Overview operating bandwidth above Finisars XFP-RF transmitter rack-mounted host system is specifically designed around 1.2GHz the new XFP-RF transmitter module to provide high module density and low power User-friendly web browser consumption in cable operators hubs and headends. Ten full-band DOCSIS 3.1 HFC interface to set up and configure transmitters can be deployed in this 1 rack-unit high chassis. For each transmitter port, transmitters the host system provides individual RF amplification and adjustable RF attenuation to Standard F-type connectors for optimize the optical module index on each XFP-RF transmitter. RF input in rear of the chassis RF Test point for each This host system has an embedded controller which provides sophisticated control transmitter port functions and multiple communication interfaces. A web browser user interface allows Front and back Ethernet the transmitter modules to be configured through one of the two Ethernet SNMP ports. SNMP ports Also, an element management system can remotely monitor and control the transmitter USB port for future interface modules by connecting the system to an IP network. applications The host system is powered by one or two hot-swappable pluggable power supply Two slots for hot-swappable modules that install in the rear of the chassis. A fully-loaded host system can be powered pluggable power supply by one AC power supply or one DC power supply. For redundancy, a second power modules supply can be added. For complete power system redundancy in headends or hubs, one Field-Replaceable Cooling Fan AC power supply and one DC power supply can be used simultaneously. Mounts into standard 19-inch racks Key Advantages Complies with the SCTE HMS HE High-Density: 10 transmitters per rack-unit Optics Management Information Redundant powering capability Base (MIB) Specifications User-friendly web browser configuration tool Applications 1550nm Broadcast with DWDM Narrowcast Overlay architectures All-Digital QAM networksChassis, XFP-RF Transmitter Host System Specifications Parameter Value RF Bandwidth 50 MHz to 1200 MHz RF Input Level +12 dBmV per channel with loading of 153 QAM Channels RF Impedance 75 single-ended RF Flatness 1.0 dB typ, peak to peak, 50 MHz to 1003 MHz RF Input Return Loss 16 dB min, 52 MHz to 1003 MHz RF Input Connections F-type connectors (10) on rear RF Test Point Connections MCX-75 Female Sockets (10) on front (ANSI/SCTE 176 2011) Test Point RF level 20dB down from RF input level at F-type connector Dimensions 449 mm (W ) X 378 mm (D) X 44.5 mm (H) 17.7 in (W) X 14.875 in (D) X 1.75 in (H) Operating Temperature Range 0C to 50C Storage Temperature Range -40C to 85C Power Consumption 60 Watts, Max (includes two power supplies and embedded controller not XFP-RF transmitter modules) Communications interfaces Ethernet SNMP, RJ-45 on Front Panel Ethernet SNMP, RJ-45 on Rear Panel USB port on Front Panel (future use) Indicators LED for each transmitter port (10) Summary LEDs for chassis and power supply status AC Power Supply XPACAA 105 to 264 Vrms, auto-sensing 47 to 63 Hz DC Power Supply XPDCAA 36 to 75 Vdc Rear View Product Selection Part Number Description XC00AAQTZAJ Host system, XFP-RF transmitter, 1 rack-unit high, 10 XFP-RF ports XPACAA Power Supply for XFP-RF Host system 10UP, AC XPDCAA Power Supply for XFP-RF Host system 10UP, DC 1389 Moffett Park Drive Phone: +1-408-548-1000 Sunnyvale, CA 94089-1133 Sales: +1-408-541-5690 www.finisar.com Email: sales finisar.com 2015 Finisar Corporation. All rights reserved. Finisar is a registered trademark of Finisar Corporation. Features and specifications are subject to change without notice. 05/15 Visit Our Website