ME810A-HV35R module Datasheet Version 1.2 Document Reference No.: BRT 000041 Clearance No.: BRT 020 Future Technology Devices International Datasheet ME810A-HV35R Display Module General Purpose Multi Media Controller 1.1 Features 1 Introduction The ME810A-HV35R is a development module for The ME810A-HV35R utilises the FTDI FT810 FTDIs FT810, Embedded Video Engine (EVE) Embedded Video Engine. Graphic, audio and touch graphics controller IC. This module behaves as an features of the FT810 can be accessed with the SPI slave, and requires a SPI Master for proper ME810A-HV35R. For a full list of the FT810s micro-controller interface and system integration. features, please see the FT81x datasheet. The ME810A-HV35R has the following features: The ME810A-HV35R module includes a 3.5 inch 320*480, portrait TFT LCD panel with resistive Ready to use LCD module. touch screen and buzzer for audio output. Users can also connect to different LCD screens which Supports resistive touch with pressure sensing. meet the FT810 technical specification and fit with the ME810A-HV35R LCD interface connector. Supports portrait and landscape display mode. Supports mono audio output. On board LCD backlight LED driver. On board buzzer with a transistor control. +3.3V single power supply. Supports configurable LCD with 4-line SPI. Direct connect with MM900EV module series as a display module. Bezel with four mounting holes for system assembly. Neither the whole nor any part of the information contained in, or the product described in this manual, may be adapted or reproduced in any material or electronic form without the prior written consent of the copyright holder. This product and its documentation are supplied on an as-is basis and no warranty as to their suitability for any particular purpose is either made or implied. Future Technology Devices International Ltd will not accept any claim for damages howsoever arising as a result of use or failure of this product. Your statutory rights are not affected. This product or any variant of it is not intended for use in any medical appliance, device or system in which the failure of the product might reasonably be expected to result in personal injury. This document provides preliminary information that may be subject to change without notice. No freedom to use patents or other intellectual property rights is implied by the publication of this document. Future Technology Devices International Ltd, Unit 1, 2 Seaward Place, Centurion Business Park, Glasgow G41 1HH United Kingdom. Scotland Registered Company Number: SC136640 Copyright Bridgetek Limited 1 ME810A-HV35R module Datasheet Version 1.2 Document Reference No.: BRT 000041 Clearance No.: BRT 020 2 Ordering Information Part No. Description ME810A-HV35R-BK FT810 module, with FPC/FFC 50 LCD connector, 3.5 inch TFT LCD display panel preinstalled with resistive touch. Black bezel. ME810A-HV35R-PL FT810 module, with FPC/FFC 50 LCD connector, 3.5 inch TFT LCD display panel preinstalled with resistive touch. Pearl bezel. Table 2-1 Ordering information Note: This module is recommended as an accessory to the MM900EV series (due Nov 2015) for development purposes. For more information on the MM900EV series, refer to: