Nero-NP1 FTDI

NerO Module Datasheet Datasheet Version 1.1 Document Reference No.: BRT 000043 Clearance No.: BRT 030 Future Technology Devices International Limited Datasheet NerO Module 1.1 Features 1 Introduction The Nero is a reference design for an energy 16MHz ATmega328 32-pin TQFP package efficient Arduino UNO compatible board based on microcontroller. the ATMEGA328 with the FTDI FT231X USB- UNO R3 form factor UART, capable of operating at 5V with a full 1A while remaining cool to the touch 14 Digital I/O Pins (6 PWM outputs) There are 3 type of modules for selection: 6 Analog Inputs NerO-LP1, with 2.54mm pitch female header FTDI FT231XS USB UART interface with long shield pins NerO-SP1, with 2.54mm pitch female header A Micro-B USB connects to PC connect and with short shield pins communication. NerO-NP1, with spare shield pins but not mounted. (Provide long shield pins VIN Input voltage - 7V to 20V ( 9V or 12V externally.) recommended ) Hardware Reset button provided. 5V Switching regulator with 1A output current CE and FCC certified Optiboot bootloader preloaded Arduino Software (IDE) and UNO library compatible, Arduino shield compatible FTDI Shield available soon Neither the whole nor any part of the information contained in, or the product described in this manual, may be adapted or reproduced in any material or electronic form without the prior written consent of the copyright holder. This product and its documentation are supplied on an as-is basis and no warranty as to their suitability for any particular purpose is either made or implied. Future Technology Devices International Ltd will not accept any claim for damages howsoever arising as a result of use or failure of this product. Your statutory rights are not affected. This product or any variant of it is not intended for use in any medical appliance, device or system in which the failure of the product might reasonably be expected to result in personal injury. This document provides preliminary information that may be subject to change without notice. No freedom to use patents or other intellectual property rights is implied by the publication of this document. Future Technology Devices International Ltd, Unit 1, 2 Seaward Place, Centurion Business Park, Glasgow G41 1HH United Kingdom. Scotland Registered Company Number: SC136640 Copyright Bridgetek Limited 1 NerO Module Datasheet Datasheet Version 1.1 Document Reference No.: BRT 000043 Clearance No.: BRT 030 2 Ordering Information Part No. Description Arduino UNO compatible board based on the FTDI FT231X USB UART. NerO-LP1 Power supply delivers 5V at a full 1A without overheating. Long shield pins. Arduino UNO compatible board based on the FTDI FT231X USB UART. NerO-SP1 Power supply delivers 5V at a full 1A without overheating. Short shield pins. Arduino UNO compatible board based on the FTDI FT231X USB UART. NerO-NP1 Power supply delivers 5V at a full 1A without overheating. Spare shield pins (not mounted and provide long shield pins on the package.) Copyright Bridgetek Limited 2