UMFT201XA-02 FTDI

UMFT201XA Datasheet Version 1.4 Document Reference No.: FT 000516 Clearance No.: FTDI 266 Future Technology Devices International Ltd Datasheet UMFT201XA USB to I2C Development Module 2 UMFT201XA is a USB to I C DIP module with a 0.3 row pitch. 1.1 Features 1 Introduction The UMFT201XA is a development module for The UMFT201XA utilises the FTDI FT201XQ all the FTDIs FT201XQ, one of the devices from FTDIs features of the FT201X can be utilized with the range of USB interface bridging integrated circuit UMFT201XA. For a full list of the FT201Xs features 2 devices. FT201X is a USB to I C interface with a please see the FT201X datasheet which can be battery charger detection feature, which can found by clicking here. In addition to the features allow batteries to be charged with a higher listed in the FT201X datasheet, the UMFT201XA has current from a dedicated charger port (without the following features: the FT201X being enumerated). In addition, asynchronous and synchronous bit bang interface Small PCB assembly module designed to fit a modes are available. The internally generated standard 7.62mm (0.3) wide 16 pin DIP clock (6MHz, 12MHz and 24MHz) can be brought socket. Pins are on a 2.54mm (0.1) pitch. out on one of the CBUS pins to be used to drive a microprocessor or external logic. On board USB mini-B socket allows module to be connected to a PC or USB host via a The UMFT201XA is a module which is designed to plug into a standard 0.3 wide 16 pin DIP socket. standard A to mini-B USB cable. All components used, including the FT201XQ are Functionally configurable using solder links. The Pb-free (RoHS compliant). default solder links setup enables the module to function without peripheral wires or application board. Other configurations enable external power supply options and variation of logic reference levels. Neither the whole nor any part of the information contained in, or the product described in this manual, may be adapted or reproduced in any material or electronic form without the prior written consent of the copyright holder. This product and its documentation are supplied on an as- is basis and no warranty as to their suitability for any particular purpose is either made or implied. Future Technology Devices International Ltd will not accept any claim for damages howsoever arising as a result of use or failure of this product. Your statutory rights are not affected. This product or any variant of it is not intended for use in any medical appliance, device or system in which the failure of the product might reasonably be expected to result in personal injury. This document provides preliminary information that may be subject to change without notice. No freedom to use patents or other intellectual property rights is implied by the publication of this document. Future Technology Devices International Ltd, Unit 1, 2 Seaward Place, Centurion Business Park, Glasgow G41 1HH United Kingdom. Scotland Registered Company Number: SC136640 Copyright Future Technology Devices International Limited 1 UMFT201XA Datasheet Version 1.4 Document Reference No.: FT 000516 Clearance No.: FTDI 266 Table of Contents 1 Introduction .................................................................... 1 1.1 Features .................................................................................... 1 2 Driver Support ................................................................ 3 3 Ordering Information & TID ............................................ 4 4 UMFT201XA Signals and Configurations .......................... 5 4.1 UMFT201XA Pin Out .................................................................. 5 4.2 Signal Descriptions ................................................................... 6 4.3 CBUS Signals Options ................................................................ 7 5 Module Configurations .................................................... 8 5.1 Solder Link Configuration Options ............................................. 8 5.2 Solder Link Modfications ........................................................... 8 5.3 BUS Powered Configuration ...................................................... 9 5.4 Self Powered Configuration .................................................... 10 5.5 USB Bus Powered with Power Switching Configuration .......... 11 5.6 Variable IO Voltage Supply ..................................................... 12 5.7 3.3V Voltage Supply ................................................................ 13 5.8 Configuring the MTP ROM ....................................................... 13 5.9 Module Dimensions ................................................................. 14 5.10 IC Package Markings ............................................................... 15 6 UMFT201XA Module Circuit Schematic .......................... 16 7 Internal MTP ROM Configuration ................................... 17 8 Contact Information ...................................................... 18 Appendix A References ................................................... 19 Document References ..................................................................... 19 Acronyms and Abbreviations ........................................................... 19 Appendix B List of Figures and Tables ............................. 20 List of Figures ................................................................................. 20 List of Tables ................................................................................... 20 Appendix C Revision History ........................................... 21 Copyright Future Technology Devices International Limited 2