UMFT201XE-01 FTDI

UMFT201XE Datasheet Version 1.3 Document Reference No.: FT 000650 Clearance No.: FTDI 292 Future Technol ogy Devices International Datasheet UMFT201XE USB to I2C Development Module 2 UMFT201XE is a USB to I C DIP module with a 0.6 row pitch. 1 Introduction 1.1 Features The UMFT201XE is a development module for The UMFT201XE utilises the FTDI FT201XQ all FTDIs FT201XQ, one of the devices from FTDIs the features of the FT201X can be utilized with range of USB interface bridging integrated circuit 2 the UMFT201XE. For a full list of the FT201Xs devices. FT201X is a USB to I C interface with a features please see the FT201X datasheet which battery charger detection feature, which can can be found by clicking here. allow batteries to be charged with a higher current from a dedicated charger port (without In addition to the features listed in the FT201X the FT201X being enumerated). In addition, datasheet, the UMFT201XE has the following asynchronous and synchronous bit bang interface features: modes are available. The internally generated clock (6MHz, 12MHz and 24MHz) can be brought out on one of the CBUS pins to be used to drive a Small PCB assembly module designed to fit a standard 15.24mm (0.6) wide 16 pin DIP microprocessor or external logic. socket. Pins are on a 2.54mm (0.1) pitch. The UMFT201XE is a module which is designed to On board USB mini-B socket allows module plug into a standard 0.6 wide 16 pin DIP socket. to be connected to a PC or USB host via a All components used, including the FT201XQ are standard A to mini-B USB cable. Pb-free (RoHS compliant). Functionally configurable using on board jumpers. The default jumper setup enables the module to function without peripheral wires or application board. Other configurations enable external power supply options and variation of logic reference levels. Neither the whole nor any part of the information contained in, or the product described in this manual, may be adapted or reproduced in any material or electronic form without the prior written consent of the copyright holder. This product and its documentation are supplied on an as-is basis and no warranty as to their suitability for any particular purpose is either made or implied. Future Technology Devices International Ltd will not accept any claim for damages howsoever arising as a result of use or failure of this product. Your statutory rights are not affected. This product or any variant of it is not intended for use in any medical appliance, device or system in which the failure of the product might reasonably be expected to result in personal injury. This document provides preliminary information that may be subject to change without notice. No freedom to use patents or other intellectual property rights is implied by the publication of this document. Future Technology Devices International Ltd, Unit 1, 2 Seaward Place, Centurion Business Park, Glasgow G41 1HH United Kingdom. Scotland Registered Company Number: SC136640 Copyright Future Technology Devices International Limited 1 UMFT201XE Datasheet Version 1.3 Document Reference No.: FT 000650 Clearance No.: FTDI 292 Table of Contents 1 Introduction .................................................................... 1 1.1 Features .................................................................................... 1 2 Driver Support ................................................................ 3 3 Ordering Information ...................................................... 4 4 UMFT201XE Signals and Configurations .......................... 5 4.1 UMFT201XE Pin Out .................................................................. 5 4.2 Signal Descriptions ................................................................... 6 4.3 CBUS Signals Options ................................................................ 7 5 Module Configurations .................................................... 9 5.1 Jumper Configuration Options .................................................. 9 5.2 BUS Powered Configuration .................................................... 10 5.3 Self Powered Configuration .................................................... 11 5.4 USB Bus Powered with Power Switching Configuration .......... 12 5.5 Variable IO Voltage Supply ..................................................... 13 5.6 3.3V Voltage Supply ................................................................ 14 5.7 Configuring the MTP ROM ....................................................... 14 6 Module Dimensions ....................................................... 15 7 IC Package Markings ..................................................... 16 8 UMFT201XE Module Circuit Schematic ........................... 17 9 Internal MTP ROM Configuration ................................... 18 10 Contact Information ...................................................... 19 Appendix A References ................................................... 21 Document References ..................................................................... 21 Acronyms and Abbreviations ........................................................... 21 Appendix B - List of Figures and Tables ............................. 22 List of Figures ................................................................................. 22 List of Tables ................................................................................... 22 Appendix C Revision History ........................................... 23 Copyright Future Technology Devices International Limited 2