UMFT201XB, UMFT220XB and UMFT230XB Datasheet Version 1.2 Document Reference No.: FT 000506 Clearance No.: FTDI 272 Future Technology Devices International Ltd Datasheet UMFT201XB, UMFT220XB, UMFT230XB Breakout Modules 2 USB to I C/UART/FT1248 breakout modules 1.1 Features 1 Introduction UMFT201XB, UMFT220XB, and UMFT230XB breakout This module is a breakout board with a low modules utilize FTDIs FT201XQ, FT220XQ, and profile. It converts USB2.0 Full-Speed to a FT230XQ chips, respectively, to convert USB to serial serial interface and connects the serial or parallel interfaces These modules support the signals to a 2.54mm (0.1) pitch 10pin following popular interfaces: female receptacle. The boards do not use a 2 - UMFT201XB bridges from USB to I C IC. USB connector, but instead the modules plug directly into the USB host connector - UMFT220XB bridges from USB to a user chosen, and the pads of the PCB makes electrical parallel bit interface, FTDIs FT1248/SPI. Note: 2 contact with the electrical contacts of the out of the 4 I/0 lines are available for this module. USB connector. - UMFT230XB bridges from USB to UART IC. All serial interfaces on these modules operate at +3.3V voltage levels, however all I/Os are 5V tolerant. 2 Driver Support Royalty-Free VIRTUAL COM PORT (VCP) Royalty-Free D2XX Direct Drivers (USB Drivers + DRIVERS for: DLL S/W Interface): Windows 8 32,64-bit Windows 8 32,64-bit Windows 7 32,64-bit Windows 7 32,64-bit Windows Vista Windows Vista Windows XP 32,64-bit Windows XP 32,64-bit Windows XP Embedded Windows XP Embedded Windows CE.NET 4.2 , 5.0 and 6.0 Windows CE.NET 4.2, 5.0 and 6.0 MAC OS OS-X MAC OS OS-X Linux 3.0 and greater Linux 3.0 and greater Android Android The drivers listed above are all available to download for free from www.ftdichip.com. Various 3rd Party Drivers are also available for various other operating systems - visit www.ftdichip.com for details. Use of FTDI devices in life support and/or safety applications is entirely at the users risk, and the user agrees to defend, indemnify and hold harmless FTDI from any and all damages, claims, suits or expense resulting from such use. UMFT201XB, UMFT220XB and UMFT230XB Datasheet Version 1.2 Document Reference No.: FT 000506 Clearance No.: FTDI 272 3 Ordering Information Module Interface Features 2 2 UMFT201XB-01 I C USB to I C with four control bus lines, 3.3V power out (with a 50mA current limit) and fused 5V. Standard option, connector fitted to CN2. 2 2 UMFT201XB-NC I C USB to I C with four control bus lines, 3.3V power out (with a 50mA current limit) and fused 5V. No connector option, no connector is fitted to CN2. 2 2 UMFT201XB-WE I C USB to I C with four control bus lines, 3.3V power out (with a 50mA current limit) and fused 5V. Wire ended option, 6 flying leads fitted to CN2. UMFT220XB-01 4-bit USB to FT1248 uses 2 FT1248 I/O lines, 3.3V power out (with a 50mA FT1248 current limit) and fused 5V. Standard option, connector fitted to CN2. UMFT220XB-NC 4-bit USB to FT1248 uses 2 FT1248 I/O lines, 3.3V power out (with a 50mA FT1248 current limit) and fused 5V. No connector option, no connector is fitted to CN2. UMFT220XB-WE 4-bit USB to FT1248 uses 2 FT1248 I/O lines, 3.3V power out (with a 50mA FT1248 current limit) and fused 5V. Wire ended option, 6 flying leads fitted to CN2. UMFT230XB-01 Basic USB to UART with four control bus lines, 3.3V power out (with a 50mA UART current limit) and fused 5V. UART rate can be up to 3 Mega Baud. Standard option, connector fitted to CN2. UMFT230XB-NC Basic USB to UART with four control bus lines, 3.3V power out (with a 50mA UART current limit) and fused 5V. UART rate can be up to 3 Mega Baud. No connector option, no connector is fitted to CN2. UMFT230XB-WE Basic USB to UART with four control bus lines, 3.3V power out (with a 50mA UART current limit) and fused 5V. UART rate can be up to 3 Mega Baud. Wire ended option, 6 flying leads fitted to CN2. 2 Copyright 2015 Future Technology Devices International Limited