UMFT60x FIFO TO USB 3.0 Bridge Evaluation Board
Version 1.0
Document Reference No.:FT_001191 Clearance No.: FTDI#457
Future
Technology
Devices
International Ltd
UMFT60x
(FIFO TO USB 3.0
Bridge Evaluation
Board)
The UMFT60xx is an evaluation/development The UMFT60xx module has the following features:
module with either FMC(LPC)/HSMC connectors
for interfacing FTDIs FT60x USB 3.0 Superspeed
Supports USB 3.0 Super Speed (5Gbps)/USB
IC with external hardware. The UMFT60xx allows
2.0 High Speed (480Mbps)/USB 2.0 Full Speed
for bridging a FIFO bus to a USB3.0 host and
(12Mbps) transfer
evaluating the functionality of the FT60x.
4 IN channels and 4 OUT channels on FIFO bus
As a daughter card, the UMFT60xx must work
connectivity
with a FIFO master board which has either a FMC
or HSMC connector. There are 4 models which
Supports multi voltage I/O: 1.8V, 2.5V and 3.3V
provide different FIFO bus interfaces and data bit
widths.
High speed connector for FIFO bus : FMC(Field
The modules are designed such that they can
Programmable Mezzanine Card) or HSMC (High
plug into most FPGA development platforms
Speed Mezzanine Card)
supplied by vendors such as Xilinx or Altera.
FMC connector is compatible with most Xilinx
Refer to Ordering Information for module
FPGA reference design boards
options.
The UMFT60xx supports 2 parallel slave FIFO bus
HSMC is compatible with most Altera FPGA
protocols (Multi-Channel FIFO / 245 Synchronous
reference design boards
FIFO) with a data burst rate of up to 400MB/s.
For a full list of the FT60xs features refer to the
Multi powered options: external DC powered,
FT60x datasheet.
BUS powered, FMC/HSMC powered
Hardware Reset and Remote Wake Up
Micro-USB3.0 receptacle
Neither the whole nor any part of the information contained in, or the product described in this manual, may be adapted or
reproduced in any material or electronic form without the prior written consent of the copyright holder. This product and its
documentation are supplied on an as-is basis and no warranty as to their suitability for any particular purpose is either made or
implied. Future Technology Devices International Ltd will not accept any claim for damages howsoever arising as a result of use or
failure of this product. Your statutory rights are not affected. This product or any variant of it is not intended for use in any medical
appliance, device or system in which the failure of the product might reasonably be expected to result in personal injury. This
document provides preliminary information that may be subject to change without notice. No freedom to use patents or other
intellectual property rights is implied by the publication of this document. Future Technology Devices International Ltd, Unit 1, 2
Seaward Place, Centurion Business Park, Glasgow G41 1HH United Kingdom. Scotland Registered Company Number: SC136640
UMFT60x FIFO TO USB 3.0 Bridge Evaluation Board
Version 1.0
Document Reference No.: FT_001191 Clearance No.: FTDI#457
1 Ordering Information
Part No. Description
UMFT600A 16 Bit FIFO bus, HSMC connector
UMFT601A 32 Bit FIFO bus, HSMC connector
UMFT600X 16 Bit FIFO bus, FMC (Low Pin Count)connector
UMFT601X 32 Bit FIFO bus, FMC(Low Pin Count) connector
Table 1.1 UMFT60xx Ordering Information
Copyright 2015 Future Technology Devices International Limited 1