UMFT60x FIFO TO USB 3.0 Bridge Evaluation Board Version 1.1 Document Reference No.:FT 001191 Clearance No.: FTDI 457 Future Technology Devices International Ltd UMFT60x (FIFO TO USB 3.0 Bridge Evaluation Board) The UMFT60xx is an evaluation/development The UMFT60xx module has the following features: module with either FMC(LPC)/HSMC connectors for interfacing FTDIs FT60x USB 3.0 Superspeed Supports USB 3.0 Super Speed (5Gbps)/USB IC with external hardware. The UMFT60xx allows 2.0 High Speed (480Mbps)/USB 2.0 Full Speed for bridging a FIFO bus to a USB3.0 host and (12Mbps) transfer evaluating the functionality of the FT60x. 4 IN channels and 4 OUT channels on FIFO bus As a daughter card, the UMFT60xx must work connectivity with a FIFO master board which has either a FMC or HSMC connector. There are 4 models which Supports multi voltage I/O: 1.8V, 2.5V and 3.3V provide different FIFO bus interfaces and data bit widths. High speed connector for FIFO bus : FMC(Field The modules are designed such that they can Programmable Mezzanine Card) or HSMC (High plug into most FPGA development platforms Speed Mezzanine Card) supplied by vendors such as Xilinx or Altera. Refer to Ordering Information for module FMC connector is compatible with most Xilinx options. FPGA reference design boards The UMFT60xx supports 2 parallel slave FIFO bus HSMC is compatible with most Altera FPGA protocols (Multi-Channel FIFO / 245 Synchronous reference design boards FIFO) with a data burst rate of up to 400MB/s. For a full list of the FT60xs features refer to the FT60x datasheet. Multi powered options: external DC powered, BUS powered, FMC/HSMC powered Hardware Reset and Remote Wake Up Micro-USB3.0 receptacle Neither the whole nor any part of the information contained in, or the product described in this manual, may be adapted or reproduced in any material or electronic form without the prior written consent of the copyright holder. This product and its documentation are supplied on an as-is basis and no warranty as to their suitability for any particular purpose is either made or implied. Future Technology Devices International Ltd will not accept any claim for damages howsoever arising as a result of use or failure of this product. Your statutory rights are not affected. This product or any variant of it is not intended for use in any medical appliance, device or system in which the failure of the product might reasonably be expected to result in personal injury. This document provides preliminary information that may be subject to change without notice. No freedom to use patents or other intellectual property rights is implied by the publication of this document. Future Technology Devices International Ltd, Unit 1, 2 Seaward Place, Centurion Business Park, Glasgow G41 1HH United Kingdom. Scotland Registered Company Number: SC136640 Copyright Future Technology Devices International Limited UMFT60x FIFO TO USB 3.0 Bridge Evaluation Board Version 1.1 Document Reference No.: FT 001191 Clearance No.: FTDI 457 1 Ordering Information Part No. Description UMFT600A-B 16 Bit FIFO bus, HSMC connector with B version chip UMFT601A-B 32 Bit FIFO bus, HSMC connector with B version chip UMFT600X-B 16 Bit FIFO bus, FMC (Low Pin Count)connector with B version chip UMFT601X-B 32 Bit FIFO bus, FMC(Low Pin Count) connector with B version chip Table 1.1 UMFT60xx Ordering Information Copyright Future Technology Devices International Limited 1