UMFT602X Module Datasheet Version 1.1 Document Reference No.: FT 001390 Clearance No.: FTDI 518 Future Technology Devices International Ltd UMFT602A/ UMFT602X The UMFT602A/X is an evaluation/development The UMFT602A/X module has the following features: module with either HSMC or FMC (LPC) connectors for interfacing FTDIs FT602 32bit Supports USB 3.1 GEN 1 Super Speed FIFO bus to USB 3.1 GEN 1 USB video class (5Gbps)/USB 2.0 High Speed (480Mbps) (UVC) bridge IC with external hardware. The transfer UMFT602A/X allows for bridging a FIFO bus to a USB3.0 host and evaluating the functionality of UVC 1.1, Raw YUV422, support 14 UVC the FT602. resolutions As a daughter card, the UMFT602A/X must work Up to 4 video input channels. One I2C bus with a FIFO master board which has either a master interface for video source device HSMC or FMC connector. There are 2 models configuration which provide different FIFO bus interfaces with 32bit data width. Supports multi voltage I/O: 1.8V, 2.5V and 3.3V The modules are designed such that they can plug into most FPGA development platforms High speed connector for FIFO bus : FMC(Field supplied by vendors such as Xilinx or Altera. Programmable Mezzanine Card) or HSMC (High Refer to Ordering Information for module Speed Mezzanine Card) options. FMC connector is compatible with most Xilinx The UMFT602A/X supports 2 parallel slave FIFO FPGA reference design boards bus protocols (Multi-Channel FIFO / 245 Synchronous FIFO) with a data burst rate of up to 400MB/s. For a full list of the FT602s features HSMC is compatible with most Altera FPGA refer to the FT602 datasheet. reference design boards Multi powered options: external DC powered, BUS powered, FMC/HSMC powered Hardware Reset Micro-USB3.0 receptacle, USB3.0 compliant and certified Neither the whole nor any part of the information contained in, or the product described in this manual, may be adapted or reproduced in any material or electronic form without the prior written consent of the copyright holder. This product and its documentation are supplied on an as-is basis and no warranty as to their suitability for any particular purpose is either made or implied. Future Technology Devices International Ltd will not accept any claim for damages howsoever arising as a result of use or failure of this product. Your statutory rights are not affected. This product or any variant of it is not intended for use in any medical appliance, device or system in which the failure of the product might reasonably be expected to result in personal injury. This document provides preliminary information that may be subject to change without notice. No freedom to use patents or other intellectual property rights is implied by the publication of this document. Future Technology Devices International Ltd, Unit 1, 2 Seaward Place, Centurion Business Park, Glasgow G41 1HH United Kingdom. Scotland Registered Company Number: SC136640 Copyright Future Technology Devices International Limited 1 UMFT602X Module Datasheet Version 1.1 Document Reference No.: FT 001390 Clearance No.: FTDI 518 1 Ordering Information Part No. Description UMFT602A-B 32 Bit FIFO bus, HSMC connector UMFT602X-B 32 Bit FIFO bus, FMC(Low Pin Count) connector Table 1.1 UMFT60xx Ordering Information Copyright Future Technology Devices International Limited 2