Programmable Triple Output Linear DC Power Supplies 1368, 1369, and 1370 Features: Three independent and fully isolated channels Series and parallel modes connect channels to maximize output voltage or current Fully programmable channels with Output On/Off control Simultaneous display of voltage and current settings on all three channels High programming and readback resolution of 1 mV / 0.1 mA Low ripple, noise, load, and line regulation Save and recall up to 40 instrument settings USB connector for firmware updates Remote sense Timer-controlled output function adjustable from 0.1 9999.9 s Tracking mode maintains a programmed ratio for connected channels PC connection/control through RS-232 or USB supporting standard SCPI commands Description: Intelligent fan control, energy saving and noise The Performance Series (Models 1368, 1369, 1370) are linear triple output power supplies with fully reduction programmable isolated outputs. These outputs can be adjusted independently or combined in series or parallel to output higher voltage or current. Each model offers a different variable output voltage and Overvoltage (OVP) and overcurrent (OCP) current on two channels. The third channel is rated at 6 volts, 5 amps. These supplies offer tracking protection mode with user-configurable ratios between channels, access to a timer controlled output function, and store/recall on up to 40 instrument settings per channel. Connecting to a PC by USB or RS-232 enables Keylock function remote instrument control using industry standard protocols. Applications: Education Model 1368 1369 1370 Research and Design Production Testing 0 to 30 V (CH 1 & 2) 0 to 60 V (CH 1 & 2) 0 to 30 V (CH 1 & 2) Voltage 0 to 6 V (CH 3) 0 to 6 V (CH 3) 0 to 6 V (CH 3) 0 to 3 A (CH 1 & 2) 0 to 3 A (CH 1 & 2) 0 to 6 A (CH 1 & 2) Current 0 to 5 A (CH 3) 0 to 5 A (CH 3) 0 to 5 A (CH 3) Power 210 W 390 W 390 W Specifications and appearance subject to change without notice D136X00 120919 1 - www.globalspecialties.comFront Panel 1 2 3 4 5 6 7 8 13 9 14 15 16 12 11 10 1. USB interface to update firmware 9. ENTER key to input the data and can be used with the LOCK/LOCAL key to take screenshots 2. Model name and number 10. Output terminals, channels 1, 2, and 3 from right to left 3. LCD display, 480 272 pixels, 24-bit color, 4.3-inch color TFT LCD screen 11. Soft keys to set the display content 4. Adjustment knob, selection tool and fine adjustments 12. Power switch to power the unit on or off 5. Arrow keys for moving the cursor 13-15. Output keys to individually turn on each of the channel outputs 6. Numeric keys to input the specific values 16. LOCK/LOCAL key to lock the keys or switch from remote to local 7. ON/OFF key to turn on or off the three channel outputs simultaneously control. Can be used with the ENTER key to take screenshots 8. MENU key for quick access to menu interface Rear Panel 1 2 66 55 44 33 1. USB Interface for communication by PC via USB DEVICE 4. Remote test terminal adds same function as output in front panel, 4-terminal sampling function is added for remote sense 2. RS-232 Function is same as USB 5. Serial number 3. Power socket connecting 115/230 V 50 Hz AC power 6. Thermostatically controlled fan Specifications and appearance subject to change without notice D136X00 120919 2 - www.globalspecialties.com