Optical and Mechanical Encoders Specifications are subject to change. Please refer to the current datasheet on www.grayhill.com for the most current published specifications for this product. Optical Encoders SERIES 62F APPLICATIONS 1/2 Package, Lighted Shaft Global Positioning Driver Information Systems FEATURES Medical Equipment Integrated Self-Lighting System for Cockpit Controls Knob Illumination Mixing Boards 1 Million Rotational Cycles Suggested Mounting Panel Cutout 1/2 Package Compatible with CMOS, TTL and .161.002 4,090 ,05 .380.003 HCMOS Logic 9,650,07 Optional Integral Pushbutton Choices of Cable Length and Ter- minations Customized Solutions Available .057.002 1,450 ,05 DIMENSIONS in inches (and millimeters) Pin Version .066 .002 .219 .003 .010 (0,25)/ .070 .236 (1,68 0,05) (5,56 0,08) .025 (0,64) (1,78) (5,99) .312 (7,92) PUSH BUTTON DIA .250 TRAVEL (6,35) .390 (9,91) .540 (13,72) .360 .152 (9,14) .002 .250 (6,35) REF250 3/8-32 UNEF-2A THREAD (3,86 .375 .002 THREADS TO BE WITHIN .250 (6,35) 0,05) .015 (6,35 .030 (0,76) OF SHOULDER .525 .015 (9,53 .500 0,05) (13,34 0,38) (12,7) 25,42) DIA448 (11,4) .293 (7,4) .490 REF (12,45) With on-board lighting system .460 .581.010 (11,68) .657.015 .087(2,21) (14,80,3) REF (16,70,4) Cable Version .066 .002 .219 .003 .070 4.00 .20 (.040 5,08) (1,68 0,05) (5,56 0,08) (1,78) .312 (7,92) DIA .250 (6,35) .390 (9,91) .540 (13,72 .320 (8,13) .152 REF .250 .010 (0,25)/ .002 .250 .002 .510 .015 .100 .375 28 AWG CONNECTOR .025 (0,64) (3,86 3/8-32 UNEF-2A THREAD (6,35) (6,35 (12,95 0,38) (2,54) .015 CABLE IS AMP PUSH- 0,05) THREADS TO BE WITHIN 0,13) .250 (6,35) STRIP- (9,52 WIRES ON .525 .015 P/N 215083-6 BUTTON .030 (0,76) OF SHOULDER .500 PED 0,38) .050 (1,27) (13,34 0,38) TRAVEL (12,7) AND CENTERS .391 TINNED (10,0) .500 REF (12,7) .490 (12,45) With on-board lighting system .657.015 .581.010 (16,70,4) (14,80,3) Connector Stripped Version Version Unless otherwise specified, standard tolerance is .010 (0,25). Grayhill, Inc. 561 Hillgrove Avenue LaGrange, Illinois 60525-5997 USA Phone: 708-354-1040 Fax: 708-354-2820 www.grayhill.com 62FXX-XX-XXXC-L XXXX X-X 62FXX-01-XXXC XXXX X-X 62FXX-XX-P XXXX X-X GRAYHILL 8 7 6 5 4 3 2 1 GRAYHILL 6 5 4 3 2 1 GRAYHILL 6 5 4 3 2 1 62FXX-XX-P-L XXXX X-X GRAYHILL 8 7 6 5 4 3 2 1Optical and Mechanical Encoders Specifications are subject to change. Please refer to the current datasheet on www.grayhill.com for the most current published specifications for this product. Optical Encoders CIRCUITRY, TRUTH TABLE, AND WAVEFORM Standard Quadrature 2-Bit Code PIN s POWER +5 V 8 * R OUTPUT A 7 * R .244 (6,20) Clockwise Rotation OUTPUT B 6 Position Output A Output B C HIGH OUTPUT POWER +5 V 1 5 A LOW 150 (LED) 2 5% HIGH 4 GROUND 3 OUTPUT B 4 LOW 3 NORMALLY OPEN PUSHBUTTON Indicates logic high blank indicates 1 2 3 4 5 6 SWITCH 2 logic low. Code repeats every 4 positions. POSITION NUMBER GROUND 1 * EXTERNAL PULL-UP RESISTORS REQUIRED FOR OPERATION (2.2k). ** Circuit shown with on-board lighting system. Versions without on-board lighting ** sys- tem do not have LED power connections. Refer to standard 62A series for circuitry. SPECIFICATIONS Operating Torque: Shaft: Aluminum Pushbutton Switch Ratings Rating: 5 Vdc, 10 mA, resistive Detent: 2.0 1.4 in-oz initially Bushing: Zinc casting Contact Resistance: less than 10 ohms Non-detent: less than 1.5 in-oz initially Shaft Retaining Ring: Stainless steel (TTL or CMOS compatible) Shaft Push Out Force: 45 lbs minimum Detent Spring: Stainless steel Pushbutton Life: 3 million actuations Mounting Torque: 15 in-lbs maximum Printed Circuit Boards: NEMA grade FR-4 minimum Terminal Strength: 15 lbs cable pull-out force gold over nickel or palladium Contact Bounce: less than 4 mS at make minimum Terminals: Brass, tin-plated and less than 10 mS at break Operating Speed: 100 RPM maximum Mounting Hardware: One brass, nickel-plated Actuation Force: 1000 300 grams Axial Shaft Play: .010 maximum nut and zinc-plated spring steel with clear Pushbutton Travel: .010/.025 inch trivalent chromate finish lockwasher supplied with each switch. (Nut is 0.094 inches thick by Environmental Ratings Switch Ratings 0.433 inches across flats) Operating Temperature Range: -40C to 85C Coding: 2-bit quadrature coded output Rotor: Thermoplastic Storage Temperature Range: -55C to 100C Operating Voltage: 5.0 .25 Vdc Code Housing: Thermoplastic Relative Humidity: 9095% at 40C for 96 Voltage Breakdown: 250 Vac between Pushbutton Dome: Stainless steel hours mutually insulated parts Dome Retaining Disk: Thermoplastic Vibration Resistance: Harmonic motion with Supply Current: 30 mA maximum Pushbutton Housing: Thermoplastic amplitude of 15G s, within a varied 10 to 2000 Logic Output Characterisitics: Phototransistor: Planar Silicon NPN Logic High: 3.8 Vdc minimum Hz frequency for 12 hours per MIL-STD-202, Pushbutton Contact: Brass, nickel-plated Logic Low: 0.8 Vdc maximum Method 204 Rotational Life: 1,000,000 cycles minimum Flex Cable: 28 AWG, stranded/top coated Mechanical Shock: Test 1: 100G for 6 mS, (One cycle is a rotation through all positions wire, PVC coated on .050 or .100 centers half sine, 12.3 ft/s Test 2: 100G for 6 mS, and a full return) (cabled version) sawtooth, 9.7 ft/s Minimum Sink Current: 2.0 mA Header Pins: Phospher bronze, tin-plated Power Consumption: 150mW maximum Spacer: ABS Materials and Finishes Optical Rise and Fall Times: less than 30 Backplate/Strain Relief: Stainless steel Code Housing: Reinforced thermoplastic mS maximum Light Pipe: Thermoplastic LED Housing: Thermoplastic ORDERING INFORMATION Series Angle of Throw: Detent Non-detent 11 = 11.25 or 32 pos. 01 = 11.25 or 32 positions 15 = 15 or 24 positions 05 = 15 or 24 positions 18 = 18 or 20 pos. 08 = 18 or 20 positions 22 = 22.5 or 16 positions 02 = 22.5 or 16 positions Pushbutton Option: 01 = w/o pushbutton, 02 = with pushbutton 62F22-01-040S-L LED: blank = no LED, L = supplied with LED Termination: S = Stripped cable S-L = Stripped cable, LED C = Connector C-L = Connector, LED P = Pin P-L = Pin, LED Cable Termination: 040 = 4.0in. Cable is terminated with Amp P/N 215083-6. See Amp Mateability guide for mating connector details. *Eliminate cable length if ordering pins. (Ex: 62A22-02-P) Custom materials, styles, colors, and markings are available. Control knobs available. Available from your local Grayhill Component Distributor. For prices and discounts, contact a local Sales Office, an authorized local Distributor, or Grayhill. Grayhill, Inc. 561 Hillgrove Avenue LaGrange, Illinois 60525-5997 USA Phone: 708-354-1040 Fax: 708-354-2820 www.grayhill.com