GS81302QT07/10/19/37E-318/300/250/200
318 MHz200 MHz
165-Bump BGA TM
144Mb SigmaQuad-II+
1.8 V V
Commercial Temp
DD
Industrial Temp
Burst of 2 SRAM 1.8 V and 1.5 V I/O
are just one element in a family of low power, low voltage
Features
HSTL I/O SRAMs designed to operate at the speeds needed to
2.0 clock Latency
implement economical high performance networking systems.
Simultaneous Read and Write SigmaQuad Interface
JEDEC-standard pinout and package
Dual Double Data Rate interface
Clocking and Addressing Schemes
Byte Write controls sampled at data-in time
Dual-Range On-Die Termination (ODT) on Data (D), Byte The GS81302QT07/10/19/37E SigmaQuad-II+ SRAMs are
Write (BW), and Clock (K, K) inputs synchronous devices. They employ two input register clock
Burst of 2 Read and Write inputs, K and K. K and K are independent single-ended clock
1.8 V +100/100 mV core power supply inputs, not differential inputs to a single differential clock input
1.5 V or 1.8 V HSTL Interface buffer.
Pipelined read operation
Fully coherent read and write pipelines Each internal read and write operation in a SigmaQuad-II+ B2
ZQ pin for programmable output drive strength RAM is two times wider than the device I/O bus. An input data
Data Valid Pin (QVLD) Support bus de-multiplexer is used to accumulate incoming data before
IEEE 1149.1 JTAG-compliant Boundary Scan it is simultaneously written to the memory array. An output
165-bump, 15 mm x 17 mm, 1 mm bump pitch BGA package data multiplexer is used to capture the data produced from a
RoHS-compliant 165-bump BGA package available single memory array read and then route it to the appropriate
output drivers as needed. Therefore the address field of a
SigmaQuad-II+ B2 RAM is always one address pin less than
SigmaQuad Family Overview
the advertised index depth (e.g., the 16M x 8 has an 8M
The GS81302QT07/10/19/37E are built in compliance with
addressable index).
the SigmaQuad-II+ SRAM pinout standard for Separate I/O
synchronous SRAMs. They are 150,994,944-bit (144Mb)
SRAMs. The GS81302QT07/10/19/37E SigmaQuad SRAMs
Parameter Synopsis
-318 -300 -250 -200
tKHKH 3.145 ns 3.3 ns 4.0 ns 5.0 ns
tKHQV 0.45 ns 0.45 ns 0.45 ns 0.45 ns
Rev: 1.00e 8/2017 1/28 2011, GSI Technology
Specifications cited are subject to change without notice. For latest documentation see GS81302QT07/10/19/37E-318/300/250/200
16M x 8 SigmaQuad-II SRAMTop View
1 2 3 4 5 6 7 8 9 10 11
A CQ SA SA W NW1 K SA R SA SA CQ
NC/SA
B NC NC NC SA K NW0 SA NC NC Q3
(288Mb)
C NC NC NC V SA SA SA V NC NC D3
SS SS
D NC D4 NC V V V V V NC NC NC
SS SS SS SS SS
E NC NC Q4 V V V V V NC D2 Q2
DDQ SS SS SS DDQ
F NC NC NC V V V V V NC NC NC
DDQ DD SS DD DDQ
G NC D5 Q5 V V V V V NC NC NC
DDQ DD SS DD DDQ
H Doff V V V V V V V V V ZQ
REF DDQ DDQ DD SS DD DDQ DDQ REF
J NC NC NC V V V V V NC Q1 D1
DDQ DD SS DD DDQ
K NC NC NC V V V V V NC NC NC
DDQ DD SS DD DDQ
L NC Q6 D6 V V V V V NC NC Q0
DDQ SS SS SS DDQ
M NC NC NC V V V V V NC NC D0
SS SS SS SS SS
N NC D7 NC V SA SA SA V NC NC NC
SS SS
P NC NC Q7 SA SA QVLD SA SA NC NC NC
R TDO TCK SA SA SA ODT SA SA SA TMS TDI
11 x 15 Bump BGA15 x 17 mm Body1 mm Bump Pitch
Notes:
1. NW0 controls writes to D0:D3. NW1 controls writes to D4:D7.
2. B5 is the expansion address.
Rev: 1.00e 8/2017 2/28 2011, GSI Technology
Specifications cited are subject to change without notice. For latest documentation see