GS8662QT07/10/19/37BD-357/333/300/250/200 357 MHz200 MHz 165-Bump BGA TM 72Mb SigmaQuad-II+ 1.8 V V Commercial Temp DD Industrial Temp Burst of 2 SRAM 1.8 V and 1.5 V I/O are just one element in a family of low power, low voltage Features HSTL I/O SRAMs designed to operate at the speeds needed to 2.0 Clock Latency implement economical high performance networking systems. Simultaneous Read and Write SigmaQuad Interface JEDEC-standard pinout and package Dual Double Data Rate interface Clocking and Addressing Schemes Byte Write controls sampled at data-in time Dual-Range On-Die Termination (ODT) on Data (D), Byte The GS8662QT07/10/19/37BD SigmaQuad-II+ SRAMs are Write (BW), and Clock (K, K) inputs synchronous devices. They employ two input register clock Burst of 2 Read and Write inputs, K and K. K and K are independent single-ended clock 1.8 V +100/100 mV core power supply inputs, not differential inputs to a single differential clock input 1.5 V or 1.8 V HSTL Interface buffer. Pipelined read operation Fully coherent read and write pipelines Each internal read and write operation in a SigmaQuad-II+ B2 ZQ pin for programmable output drive strength RAM is two times wider than the device I/O bus. An input data Data Valid Pin (QVLD) Support bus de-multiplexer is used to accumulate incoming data before IEEE 1149.1 JTAG-compliant Boundary Scan it is simultaneously written to the memory array. An output 165-bump, 13 mm x 15 mm, 1 mm bump pitch BGA package data multiplexer is used to capture the data produced from a RoHS-compliant 165-bump BGA package available single memory array read and then route it to the appropriate output drivers as needed. Therefore the address field of a SigmaQuad-II+ B2 RAM is always one address pin less than SigmaQuad Family Overview the advertised index depth (e.g., the 8M x 8 has an 4M The GS8662QT07/10/19/37BD are built in compliance with addressable index). the SigmaQuad-II+ SRAM pinout standard for Separate I/O synchronous SRAMs. They are 75,497,472-bit (72Mb) SRAMs. The GS8662QT07/10/19/37BD SigmaQuad SRAMs Parameter Synopsis -357 -333 -300 -250 -200 tKHKH 2.8 ns 3.0 ns 3.3 ns 4.0 ns 5.0 ns tKHQV 0.45 ns 0.45 ns 0.45 ns 0.45 ns 0.45 ns Rev: 1.00b 8/2017 1/28 2011, GSI Technology Specifications cited are subject to change without notice. For latest documentation see GS8662QT07/10/19/37BD-357/333/300/250/200 8M x 8 SigmaQuad-II SRAMTop View 1 2 3 4 5 6 7 8 9 10 11 NC/SA A CQ SA SA W NW1 K R SA SA CQ (144Mb) NC/SA B NC NC NC SA K NW0 SA NC NC Q3 (288Mb) C NC NC NC V SA SA SA V NC NC D3 SS SS D NC D4 NC V V V V V NC NC NC SS SS SS SS SS E NC NC Q4 V V V V V NC D2 Q2 DDQ SS SS SS DDQ F NC NC NC V V V V V NC NC NC DDQ DD SS DD DDQ G NC D5 Q5 V V V V V NC NC NC DDQ DD SS DD DDQ H Doff V V V V V V V V V ZQ REF DDQ DDQ DD SS DD DDQ DDQ REF J NC NC NC V V V V V NC Q1 D1 DDQ DD SS DD DDQ K NC NC NC V V V V V NC NC NC DDQ DD SS DD DDQ L NC Q6 D6 V V V V V NC NC Q0 DDQ SS SS SS DDQ M NC NC NC V V V V V NC NC D0 SS SS SS SS SS N NC D7 NC V SA SA SA V NC NC NC SS SS P NC NC Q7 SA SA QVLD SA SA NC NC NC R TDO TCK SA SA SA ODT SA SA SA TMS TDI 11 x 15 Bump BGA13 x 15 mm Body1 mm Bump Pitch Notes: 1. NW0 controls writes to D0:D3. NW1 controls writes to D4:D7. 2. Pins A7 and B5 are the expansion addresses. Rev: 1.00b 8/2017 2/28 2011, GSI Technology Specifications cited are subject to change without notice. For latest documentation see