Technical Data Sheet BERGQUIST SILPAD TSP 1800 Known as BERGQUIST SIL-PAD1200 November -2018 PRODUCT DESCRIPTION TYPICAL PROPERTIES Exceptional Performance, Thermally Conductive Elastomeric Physical Properties Material . Shore Hardness, ASTM D2240 ,Shore 00 80 Elongation ,45 to warp and fill,ASTM D412 ,% 20 Technology Silicone Tensile Strength ,ASTM D412 ,MPa 9 Appearance Black Flammability Rating, UL 94 V-0 Reinforcement Carrier Fiberglass Total Thickness 0.229 to 0.406mm Electrical Properties Application Thermal management, DielectricBreakdown Voltage ,ASTM D149,Vac 6,000 Thermally conductive adhesive DielectricConstant ,ASTM D150 1,000 Hz 8.0 9 Operating Temperature -60 to 180C Volume Resistivity ,ASTM D257,ohm-meter 110 Range Thermal Properties FEATURES AND BENEFITS Thermal Conductivity ,ASTM D5470,W/(m-K) 1.8 2 Thermal impedance: 0.53C-in /W 50 psi This is the measured thermal conductivity of the Exceptional thermal performance at lower application Sil-Padcompound pressures Thermal Performance vs. Pressure Smooth and non-tacky on both sides for easy TO-220 Thermal Performance ,C/W re-positioning, ease of use and assembly error reduction 10 psi 2.82 Superior breakdown voltage and surface wet out values 25 psi 2.64 Designed for applications where electrical isolation is 50 psi 2.41 critical 100 psi 2.13 Excellent cut-through resistance, designed for screw and clipmounted applications 200 psi 1.9 2 (1) TYPICAL APPLICATIONS Thermal Impedance ,ASTM D5470,C-in /W Automotive electronics control modules 10 psi 0.71 Power supplies 25 psi 0.62 Motor controls 50 psi 0.53 Audio amplifiers 100 psi 0.47 Discrete devices 200 psi 0.41 Telecommunications (1) The ASTM D5470 test fixture was utilized. The recorded values include the interfacial BERGQUIST SIL PAD TSP 1800 is a silicone based, thermal resistance. The values are provided for reference only. Actual application fiberglass- reinforced thermal interface material featuring a performance is directly related to the surface roughness, flatness and pressure applied smooth, highly compliant surface . The material features a non-tacky surface for efficientre-positioning and ease of use, as well as an optional adhesive coating . GENERAL INFORMATION For safe handling information on this product, consult the Safety BERGQUIST SILPAD TSP 1800 exhibits exceptional thermal Data Sheet, (SDS). performance at low and high application pressures . The material is ideal for placement between electronic power Not for product specifications devices and a heat sink for screw and clip mounted The technical data contained herein are intended as reference applications . only. Please contact your local quality department for assistance and recommendations on specifications for this product.TDS BERGQUIST SILPAD TSP 1800, November -2018 Trademark usage: Except as otherwise noted Alltrademarks in this document CONFIGURATIONS AVAILABLE are trademarks and/or registered trademarks of Henkel and its affiliates in the BERGQUIST SILPAD TSP 1800 are supplied in: U.S.and elsewhere. Sheet form, slit-to- width roll form Die-Cut parts Reference 1 9,12 and 16mil thicknesses Adhesive coating Conversions (C x 1.8)+ 32 =F kV/mm x 25.4 =V/mil mm /25.4 =inches N x 0.225=lb N/mm x 5.71=lb/in psi x 145 =N/mm MPa =N/mm Nm x 8.851 = lbin Nm x 0.738=lbft Nmm x 0.142 =ozin mPas =cP Disclaimer Note: The information provided in this Technical Data Sheet (TDS) including the recommendations for use and application of the product are based on our knowledge and experience of the product as at the date of this TDS. The product can have a variety of different applications as well as differing application and working conditions in your environment that are beyond our control. Henkel is, therefore, not liablefor the suitability of our product for the production processes and conditions in respect of which you use them, as well as the intended applications and results. We strongly recommend that you carry out your own prior trials to confirm such suitability of our product. Any liability in respect of the information in the Technical Data Sheet or any other written or oral recommendation(s) regarding the concerned product is excluded, except ifotherwise explicitly agreed and except in relation to death or personal injury caused by our negligence and any liability under any applicable mandatory product liability law. In case products are delivered by Henkel Belgium NV, Henkel Electronic Materials NV, Henkel Nederland BV, Henkel Technologies France SAS and Henkel France SA please additionally note the following: In case Henkel would be nevertheless held liable,on whatever legal ground, Henkels liability will in no event exceed the amount of the concerned delivery. In case products are delivered by Henkel Colombiana, S.A.S.the following disclaimer is applicable: The information provided in this Technical Data Sheet (TDS) including the recommendations for use and application of the product are based on our knowledge and experience of the product as at the date of this TDS. Henkel is, therefore, not liablefor the suitability of our product for the production processes and conditions in respect of which you use them, as well as the intended applications and results. We strongly recommend that you carry out your own prior trials to confirm such suitability of our product. Any liability in respect of the information in the Technical Data Sheet or any other written or oral recommendation(s) regarding the concerned product is excluded, except ifotherwise explicitly agreed and except in relation to death or personal injury caused by our negligence and any liability under any applicable mandatory product liability law. In case products are delivered by Henkel Corporation, Resin Technology Group, Inc., or Henkel Canada Corporation, the following disclaimer is applicable: The data contained herein are furnished for information only and are believed to be reliable.We cannot assume responsibility for the results obtained by others over whose methods we have no control. It is the user s responsibility to determine suitability for the user s purpose of any production methods mentioned herein and to adopt such precautions as may be advisable for the protection of property and of persons against any hazards that may be involved in the handling and use thereof. In light of the foregoing, Henkel Corporation specifically disclaims all warranties expressed or implied, including warranties of merchantability or fitness for a particular purpose, arising from sale or use of Henkel Corporations products. Henkel Corporation specifically disclaims any liability for consequential or incidental damages of any kind, including lost profits. The discussion herein of various processes or compositions is not to be interpreted as representation that they are free from domination of patents owned by others or as a license under any Henkel Corporation patents that may cover such processes or compositions. We recommend that each prospective user test his proposed application before repetitive use, using this data as a guide. This product may be covered by one or more United States or foreign patents or patent applications. Americas Europe Asia +1.888.943.6535 +32.1457.5611 +86.21.3898.4800 For the most direct access to local sales and technical support visit: www.henkel.com/electronics