Stay Connected with Heyco Strain Relief Bushings Heyco Lockit Strain Relief Reduce risk of carpal tunnel syndrome Pre-Assembly Equipment Pre-Assembly Equipment for Heyco Assembly-Friendly Lockit Series Strain Reliefs: RDD Lockits for Double D and Round Mounting Holes. ST Lockits for Rectangular Mounting Holes. Pre-Assemble Lockits onto cable for faster final assembly Watch this equipment in action at www.Heyco.com Click on our Strain Relief Bushings Section and then the video Evolution of the Heyco Strain Relief Bushing in the upper left square. Headlock for RDD and ST Lockits A Assembly head for RDD and ST Lockit Strain Reliefs. Simply place a Lockit Strain Relief into the U opening of the assembly head. Then place the cable into the bushing body and close the head to secure the Lockit Strain Relief permanently onto the wire. This completed sub-assembly can then be installed with fingertip pressure into the applications mounting holeat a later time, in a different place, for lower installed cost A B FootLock Assembly machine for RDD and ST Lockit Strain Reliefs. This foot-pedal activated assembly machine is identical to Autolock , except that the gravity fed track is loaded by hand instead of by a vibratory bowl. C Autolock Semi-Automatic Assembly machine for RDD and ST Lockit Strain Reliefs. Suitable for high volume production runs where batched sub-assemblies are desirable. Includes vibratory feeder bowl, track and head. The operator simply inserts the cable into the assembly head slot, then presses the foot pedal to secure the Strain Relief permanently onto the wire. This completed sub-assembly can be installed with fingertip pressure into the applications mounting holeat a later time, in a different place, for lower installed cost B Equipment for European requirements (motor power ratings and shielding) available, consult Heyco. NEW D RDD Lockit Guillotine - for fastest final assembly Optional guillotine type cutting attachment (not pictured) for the RDD Footlock and Autolock application equipment. The Lockit Guillotine removes the RDD hinge after attachment to the cable, thus reducing the clearance required for easy installation of the RDD/cable assembly, into the panel. For Part No. and ordering, please consult Heyco. For Lockit Strain Relief Hand Pliers see page 4-16. C 4-15 1-800-526-4182 732-286-1800 (NJ) FAX: 732-244-8843 www.heyco.comX-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Pliers & Tweezers category: Click to view products by Heyco manufacturer: Other Similar products are found below : 0031 32750 PN-5050/38D PG-TP-30D 4-1532129-2 77 12 115 0037 T0058765801 RT400SGSET2 571 76C MICROFOX-SP-1 DB 37 31 125 RX 8130 37 33 125 DRP10N 36 12 130 0036 64 11 115 0032 T3627B 7 6211-06 6214-45 6231-07 6231-08 6411-06 DP20N PN 5050/10D TR 20 M TR 25 15 TR 25 P A TR 30 58 R A TR 30 V TR 5000 TR 5000 PG MICROFOX-SP DB CUTFOX-SE LM CUTFOX- SE LM DB FMHT0-80519 TR 58 R A 27388 43333 102ACAX 103ACA 141SAP 150SAD 150SAMB 150SAMF 151SA 20AS