1.25mm Pitch Miniature Crimping Connector DF13 Series Type Mounting Type Mounting Height(h) DIP 5.3mm SMT 5.8mm DIP 3.6mm SMT Features Correspond to Automatic Mounting Secure the automatic plain area for the absorption 1. Miniature Size type automatic mounting machine. Designed in the low profile at mounting height 5.8mm. (SMT mounting straight type) (For DIP type, the mounting height is to 5.3mm to the Straight Type Absorption area straight and 3.6mm at the right angle) 2. Multi-contact The double row type achieves the multi-contact up to 40 contacts, and secures 30% higher density in the mounting area, compared with the single row type. 3. Correspond to Automatic Mounting The header provides the grade with the vacuum absorption area, and secures automatic mounting by the embossed tape packaging. In addition, the tube packaging can be selected. 4. Integral Basic Function Despite Miniature Size Metal fitting The header is designed in a scoop-proof box structure, and Right Angle Type completely prevents mis-insertion. Absorption area In addition, the surface mounting (SMT) header is equipped with the metal fitting to prevent solder peeling. Applications Note PC, mobile terminal, miniature type business equipment, and other various consumer equipment, including video camera Figure 1 B242 Right Angle Type Straight TypeDF13 Series 1.25mm Pitch Miniature Crimping Connector Product Specifications + + Current rating 1A Operating Temperature Range: -35 to 85 (Note 1) Storage Temperature Range: -10 to 60(Note 2) Rating Voltage rating 150V AC Operating Moisture Range: 20 to 80% Storage Moisture Range: 40 to 70% (Note 2) Item Specification Condition 1.Insulation Resistance 500M ohms min. 100V DC 2.Withstanding voltage No flashover or insulation breakdown. 500V AC/1 minute 3.Contact Resistance 30m ohms max. 100mA 4.Single Insertion/Extraction Force 0.3N (30gf) min., 3N (300gf) max. Measured at the square steel pin of 0.350.002mm 5.Vibration No electrical discontinuity of 1s or more Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 6.Humidity (Steady state) Contact resistance: 30m ohms max. Insulation resistance: 500M ohms min. 96 hours at temperature of 40 and humidity of 90% to 95% 7.Temperature Cycle Contact resistance: 30m ohms max. Insulation resistance: 500M ohms min. (-55: 30 minutes 5 to 35: 10 minutes 85: 30 minutes 5 to 35: 10 minutes) 5 cycles 8.Durability (Mating/un-mating) Contact resistance: 30m ohms max. Tin plating: 30 cycles Gold plating: 50 cycles 9.Resistance to Soldering heat No deformation of components affecting performance. Flow: 250 for 10 seconds Manual soldering: 300 for 3 seconds Reflow: At the recommended temperature profile Manual soldering: 300 for 3 seconds Note 1: Includes temperature rise caused by current flow. Note 2: The termstorag refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. Note 3: Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and specifications for a specific part number shown. Material Product Part Material Finish Remarks Crimping Socket Insulator Polyamide Beige UL94V-0 Crimping Contact for Socket Contact Phosphor copper Tin plated or gold plated ---- Insulator Polyamide Beige UL94V-0 Pin Header (Through hole) Contact Brass Tin plated ---- Insulator Polyamide Beige UL94V-0 Pin Header (SMT Single row) Contact Brass Tin plated or gold plated ---- Metal Fitting Phosphor copper Tin plated ---- Insulator Polyamide Beige UL94V-0 Pin Header (SMT Double row) Contact Brass Tin-copper plated or gold plated ---- Metal Fitting Phosphor copper Tin plated ---- Ordering Information Connector DF13 - * S - 1.25 C qewr ty q Series Name : DF13 e Number of Contacts t Contact Pitch: 1.25mm w Style Symbol : Blank: With boss r Single row: 2 to 12, 14, 15 y Connection Form / Contact Style. A: Without boss r Double row: 10, 20, 30, 40 C : Crimping socket / DSA : Straight through hole V Type B: With boss, embossed tape type r Connector Type DS : Right angle through hole / V : Straight SMT C: Without boss, embossed tape type t S: Single row socket / P: Single row pin header H : Right angle SMT t DS: Double row socket / DP: Double row pin header Contact q Style Symbol Blank: Standard e Packaging Type SCF: Socket Contact/Reel DF13 - 2630 SCF A G: Low insertion / extraction r Plating Type Blank: Tin plated qw e r w Applicable Cable Size 2630: AWG26 to 30 A : Gold plated 3032: AWG30 to 32 B243