1.25mm Pitch Super Low profile Crimping Connector DF14 Series Features 1. Super Low Profile This is a connector special for right angle which has pursued a low profile on the board. Board mounting height : 2.5mm A signal can be fetched from the area where there is no board to Board Mounting Figure board space. (Refer to fig.1) Offset type is available. Board mounting height : 1.6mm (Refer to fig.2) 2. Correspond to Automatic Mounting The header has the vacuum mount face which enables the vacuum absorption and the automatic mounting by the embossed tape packaging.In addition, the tube packaging can be selected. 3. Four Wall Type Without Friction to Board by Socket The header has the box structure to prevent from being twisted and has the perfect mis-insertion prevention method. Moreover the fig.1 header has the wall on the board side and doesn t have any trouble DF14(A) resulted from the friction to board by socket. In addition, the metal fitting is attached to prevent the solder peel. Board Mounting Figure (7.3) Applications (1) LCD, Note PC, Mobile Terminal Small business equipment, Video camera DF14H fig.2 B234 Dec.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved. (1.6) (2.4)DF14 Series1.25mm Pitch Super Low profile Crimping Connector Product Specifications Current rating 1A Operating Temperature Range -35 to +85 (Note 1) Storage Temperature Range -10 to +60 (Note 2) Rating Voltage rating 150V AC Operating Moisture Range 40 to 80% Storage Moisture Range 40 to 70% (Note 2) Item Specification Condition 1. Insulation Resistance 500M Min 100V DC 2. Withstanding voltage No flashover or insulation breakdown. 500V AC/1 minute 3. Contact Resistance 30m Max 100mA 4. Insertion/Extraction Force MIN0.15N (15gf), MAX3N (300gf) Measure at the square steel pin of 0.30.002mm 5. Vibration No electrical discontinuity of 1s or more Frequency : 10 to 55Hz, single amplitude of 0.75mm, 2 hours in each of the 3 directions. 6. Humidity (Steady state) Contact resistance : 30m Max Insulation resistance : 500M Min 96 hours at temperature of 40 and humidity of 90% to 95% (-25 : 30 minutes5 to 35 : 10 minutes85 : 30 minutes 7. Temperature Cycle Contact resistance : 30m Max Insulation resistance : 500M Min 5 to 35 : 10 minutes) 5 cycles Durability (Mating/un-mating) 8. Contact resistance : 30m Max Tin plating : 30 cycles Gold plating : 50 cycles Reflow : At the recommended temperature profile 9. Resistance to Soldering heat No deformation of components affecting performance. Manual soldering : 300 for 3 seconds Note 1 : Includes temperature rise caused by current flow. Note 2 : The termstorag refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. Material / Finish Product Part Material Finish Remarks Crimping Socket Insulator Polyamide Beige UL94V-0 Crimping Contact for Socket Contact Phosphor Copper Tin-copper plated or gold plated Insulator Polyamide Beige UL94V-0 Pin Header Contact Brass Tin-copper plated or gold plated Fitting Phosphor copper Tin-copper plated Product Number Structure Refer to the chart below when determining the product specifications from the product number. Please select from the product numbers listed in this catalog when placing orders. Connector DF 14 - * S - 1.25 C 1 2 3 4 5 6 Series Name : DF14 Connector Type 1 4 Blank : Standard, with boss S : Single row socket 2 A : on-board, without boss P : Single row pin header H : offset Contact Pitch : 1.25mm 5 Number of Contacts : 2 to 10, 15, 20, 25, 30 Contact Type 3 6 C : Crimping socket H : Right angle SMT Contact DF14 - 2628 SCF A 1 2 3 Applicable cable size 2 Packaging Type 1 2628 : 26 to 28 AWG SCF : Socket contact/reel 3032 : 30 to 32 AWG Plating Type 3 Blank : Tin plated A : Gold plated B235 Dec.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved.