AP105-DF52-2832P(65) Hirose

0.8mm Pitch, Compact and Robust Wire-to-Board Connectors DF52 Series Small and robust structure Board side Cable side Thick wall parts Thick wall parts Housing walls are thick while the connector remains small. Features 1. Small-sized connector 0.8mm Pitch, 1.75mm Height, 4.1mm Depth. Suitable for small-sized applications. 2. Small but robust structure The housing is designed with thick walls while remaining small. This produces a strong, robust connector that resists damage. 3. Suitable for high current applications. The maximum current of 2.5A (using 2-pos 28 AWG wire) Robust structure prevents damage while routing wiring. is achieved by using highly conductive material and appropriate contact force. Fig.1 4. BOX shaped contact prevents deformation. The BOX shaped crimp contact prevents deformation Box shaped contact structure during assembly and contributes to the overall stability and robustness. 5. Visual check insures fully mated Plug and Receptacle The housing is designed with an open side that allows for visual inspection to insure the connectors are fully mated preventing accidental disconnect. 6. Glow Wire compliance (Compliant with IEC 60695-2-11) 7. Halogen-free Chlorine and bromine levels are below standard values of The Box shaped structure of the crimp contact prevents deformation. IEC 61249-2-21. Fig.2 Br : less than 900ppm, Cl : less than 900ppm, Br + Cl : less than 1,500ppm. Allows for visual inspection of the mating process. Incomplete mating Mating complete Exposed contact The contact is exposed in the Mating is complete when the half-mated state. contact is no longer visible. The mated condition can be visually checked. Fig.3 In cases where the application will demand a high level of reliability, such as automotive, 2017.2 please contact a company representative for further information. Dec.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved.DF52 Series0.8mm Pitch, Compact and Robust Wire-to-Board Connectors Product Specifications No. of contacts 2 3 to 5 6 to 10 12 or more Current 28 AWG 2.5A 2.0A 1.5A 1.2A Operating temperature range : -40 to 85 (Note 1) Rating Operating humidity range : 20 to 80 % (Note 2) 30 AWG 2.0A 1.5A 1.2A 1.0A Ratings 32 AWG 1.5A 1.0A 0.8A 0.8A Voltage Storage temperature range : -10 to 60 C (Note 3) AC DC 100 Rating Storage humidity range : 40 to 70% (Note 3) Items Specifications Conditions 1.Insulation resistance 100M min. Measured at 100V DC 2.Withstanding Voltage No flashover dielectric breakdown 300V AC applied for 1 minute. 3.Contact resistance 10 max. Measured at a maximum of 20 V DC, 1mA (DC or 1000Hz) 10 cycles in each of three axis at frequency 10-55 Hz, 4. Vibration resistance No electrical discontinuity for more than 1 s half amplitude 0.75mm 2 Acceleration of 490 m/s ,11 ms, 3 directions (semi- 5. Shock resistance No electrical discontinuity for more than 1 s sinusoidal), 3 cycles each Contact resistance : 20m max. 6. Moisture resistance Temperature : 402 humidity : 90 to 95%, for 96 hours insulation resistance : 100M min. Contact resistance : 20m max. (-55 for 30 minutes 5 to 35 for 2 to 3 minutes 85 for 7. Temperature cycle 30 minutes 5 to 35 for 2 to 3 minutes) in 5 cycles insulation resistance : 100M min. 8. Mating durability Contact resistance : 20m max. Mating and Unmating : 20 times Reflow : according to the Recommended Temperature Profile No dissolution of housing parts that 9. Solder heat resistance Manual soldering : temperature of soldering iron at 350 10 affect performance. for 3 seconds Note 1 : Includes the temperature rise caused by current flow. Note 2 : Use in environments without condensation. Note 3 : The term storage refers to the long-term storage condition of unused products before PCB mounting. Operating temperature/humidity range is applied to the deenergized state after mounting of PCB and the temporary storage state during transportation. Materials / Finish Product Part Materials Finish UL Regulation Insulator Polyamide Black UL94V-0 Receptacle Contact Copper alloy Tin plating Crimping plug Insulator Polyamide Black UL94V-0 Crimp contact Contact Copper alloy Tin plating Product Number Structure Refer to the chart below when determining the product specifications from the product number. Please select from the product numbers listed in this catalog when placing orders. Plug connector Receptacle DF 52 - * P - 0.8 C DF 52 - * S - 0.8 H Series name : DF Series name : DF : 52 Series No. : 52 Series No. Number of contacts : 2 3 4 5 6 8 10 12 14 15 16 17 20 Number of contacts : 2 3 4 5 6 8 10 12 14 15 16 17 20 Connector type P : Crimping plug Connector type S : Receptacle Contact Pitch : 0.8mm Contact Pitch : 0.8mm Termination style : Crimping plug Termination style : SMT Right Angle Type Crimp contact DF 52 - 2832 PCF Series name Series No. Applicable wire size Method type/Packaging type 2 Dec.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved.