(3.76) (4.56) The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. 0.4 mm Pitch, 0.9 mm Height, Board-to-Board / Board-to-FPC Connectors DF30 Series Extremely small size Header (0.90) Receptacle 40 positions shown Overview Low profile Continuous miniaturization and increased component density on PCB created demand for extremely low profile Increased mated retention connectors. This series is addition of a new extremely low High contact reliability profile connectors to Hirose s wide range of high reliability board-to-board/board-to-FPC connection solutions. Header Features DF30*-*DP-0.4V 1. Contact reliability Concentration of the contact s normal forces at the single point assures good contact wipe and electrical reliability, 0.9mm while confirming the fully mated condition with a definite tactile click. Receptacle DF30*-*DS-0.4V 2. Self alignment Protrusion improves mated retention Recognizing the difficulties of mating extremely small connectors in limited spaces the connectors will self align in horizontal axis within 0.3 mm. 3. Automatic board placement Packaged on tape-and-reel the plug and headers have sufficiently large flat areas to allow pick-up with vacuum Self alignment nozzles of automatic placement equipment. 4. Variety of contact positions and styles Available in standard contact positions of: 20, 22, 24, 30, 34, 40, 50, 60, 70 and 80 with and without metal fittings. 0.3mm Addition of metal fittings does not affect external dimensionsof the connectors. Smaller contact positions are also available. 5. Support for continuity test connector Connectors which have increased insertion and removal durability are available for continuity tests. Contact your Hirose sales representative for details. Applications Cellular phones, PDA s, mobile computers, digital cameras, digital video cameras, and other devices demanding high reliability connections in extremely limited spaces. A283 (0.40) (10.22)The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. DF30 Series0.4 mm Pitch, 0.9 mm Height, Board-to-Board / Board-to-FPC Connectors Product Specifications Rated current 0.3A Operating temperature range : -35 to 85 (Note 1) Storage temperature range -10 to 60 (Note 2) Rating Rated voltage 30V AC Operating humidity range : Relative humidity 20% to 80% Storage humidity range Relative humidity 40% to 70% (Note 2) Item Specification Conditions 1. Insulation resistance 50 M min. 100V DC 2. Withstanding voltage No flashover or insulation breakdown. 100V AC / one minute 3. Contact resistance 100 m max. 100 mA 4. Vibration No electrical discontinuity of 1 s or more Frequency: 10 to 55 Hz, single amplitude of 0.75mm, 2 hours, 3 axis 96 hours at temperature of 40 2 and RH of Contact resistance: 100 m max. 5. Humidity 90% to 95% Insulation resistance: 25 M min. Temperature: -55/+5 to +35/+85/+5 to +35 Contact resistance: 100 m max. 6. Temperature cycle Duration: 30/10/30/10(Minutes) Insulation resistance: 50 M min. 5 cycles 7. Durability Contact resistance: 100 m max. 50 cycles(Connector for conductivity tests: 500 cycles) (insertions/withdrawals) 8. Resistance to No deformation of components Reflow: At the recommended temperature profile soldering heat affecting performance. Manual soldering: 350 for 3 seconds Note 1: Includes temperature rise caused by current flow. Note 2: The termstorag refers to products stored for long period of time prior to mounting and use. Operating temperature range and humidity range covers non-conducting condition of installed connectors in storage, shipment or during transportation. Note 3: Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and specifications for a specific part number shown. Materials and Finishes Connectors Component Material Finish Remarks Insulator LCP Color : Black UL94V-0 Receptacles Contacts Phosphor bronze Gold plated ------------- and Headers Metal fittings Phosphor bronze Tin plated ------------- Ordering information Receptacles and Headers DF30 FC DS - 0.4 V ( ) ** **** 1 2 3 4 56 7 5 1 Series name: DF30 Contact pitch: 0.4 mm 2 Configuration 6 Termination section FB: With metal fittings, without bosses V: Straight SMT 7 FC: Without metal fittings, without bosses Packaging CJ: Connector for conductivity tests (81): Embossed tape packaging (5,000 pieces per reel) 3 Number of positions: 20, 22, 24, 30, 34, 40, 50, 60, 70, 80 (82): Embossed tape packaging (1,000 pieces per reel) Connector type 4 DS: Double row receptacle DP: Double row header A284