2mm Pitch Connector for Discrete Wire Connection(Product approved by UL CSA Standard) DF3 Series Features 1. Correspond to Board Design in Wide Variation ID Socket (1) Low profile design with the mounting height of 6.8mm (2) Achieves the multi-harness by the full automatic ID machine in combination with the DF11 series ID type. (DF11 series represents the 2mm pitch single-row product.) Crimp Socket (1) Low profile design with mounting height 7.5mm. (2) Provide the contact crimping area with the sufficient space, and secures the stable crimping operation. Receptacle (1) The board can be connected horizontally or vertically in combination with the straight header with the right angle header. (2) For horizontal connection, the board to board size is the low profile of 6.6mm. (3) Compatibility with the in-line plug allows the receptacle to set the board side to the receptacle and the cable side to the plug in the board to cable connection. Pin Header (1) The board pre-fixed kink is treated with the post pin. (2) The style employs a scoop-proof and sturborn box type. (3) The type corresponding to SMT is avilable, using the heat-proof resin. This SMT header is equipped with the metal tab to prevent peeling in the solder joint area. In-line Plug (1) The crimping in-line plug consits of two types, one type, which has pursued after space merits, and the other employs the panel lock type, which can be fixed to the panel. (2) The in-line adapter is available to insert and in-line the ID socket from both sides. 2. UL, CSA Certified 3. Glow Wire Compliance (Compliant with IEC 60695-2-11) Applications Business equipment such as copy machine and printer B207 May.1.2017 Copyright 2017 HIROSE ELECTRIC CO., LTD. All Rights Reserved.DF3 Series2mm Pitch Connector for Discrete Wire Connection(Product approved by UL CSA Standard) Product Specifications 22 to 24 AWG : 3A Operating Temperature Range -55 to +105 (Note 2) Current rating Crimping Wire size 26 AWG : 2A Operating Humidity Range 40% to 80% (Note 3) Rating Note 1 28 AWG : 1A Storage Temperature Range -10 to +60 (Note 4) IDC Wire size 26, 28AWG :1A Storage Humidity Range 40% to 70% (Note 4) Voltage rating Crimping 250V AC IDC 100V AC UL CSA Safety Standard File No. UL-CSA Safety Standard and Approved specification UL : E52653 24 AWG : 3A CSA : LR95109 Rated Current Wire size 26 AWG : 2A (Note 5) Rating 28 AWG : 1A Rated Voltage 30V AC Item Specification Condition 1. Insulation Resistance 1000M min. 500V DC 2. Withstanding voltage 650V AC, 1 minute No flashover or insulation breakdown. 3. Contact Resistance 30mmax 100mA 4. Single Insertor/Extraction Force 0.3N(30gf)min, 4.4N(450gf)max. Measure by the square steel pin with 0.50.002mm 5. Vibration No electrical discontinuity of 1s or more Frequency : 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 6. Humidity (Steady state) Contact resistance : 30m max. Insulation resistance : 500M min. 96 hours at temperature of 40 and humidity of 90% to 95% 7. Temperature Cycle Contact resistance : 30m max. Insulation resistance :1000M min. (-55 : 30 minutes 5 to 35: 10 minutes 85: 30 minutes 5 to 35: 10minutes) 5 cycles 8. Durability (Mating/un-mating) Contact resistance : 30m max. Tin plating : 30 cycles Gold plating: 50 cycles THT type Flow : 260 for 10 seconds Manual soldering : 300 for 2 seconds 9. Resistance to Soldering Heat No deformation of components affecting performance. SMT type Reflow : At the recommended temperature profile Manual soldering : 300 for 3 seconds Note 1 : Current rating of header is 3A. Note 2 : Includes temperature rise caused by current flow. Apply to crimping contact type. Maximum operating temperature for IDC and receptacle type is 85. Note 3 : Please use under conditions with no condensation occurred. Note 4 : The termstorag refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. Note 5 : Apply to crimping contact type. The IDC type s rated current is 1A. Materials / Finish Part Material Finish Remarks Product Crimping Socket Insulator Polyamide Black UL94V-0 IDC Contact for Socket Contact Phosphor bronze Tin plated or gold plated Insulator Polyamide Black UL94V-0 ID Socket Contact Phosphor bronze Tin plated or gold plated Insulator Polyamide Black UL94V-0 Receptacle Contact Phosphor bronze Tin plated or gold plated Insulator Polyamide Black UL94V-0 Pin Header Contact Brass Tin plated or gold plated Insulator Polyamide Beige UL94V-0 SMT Pin Header Contact Brass Tin plated or gold plated Metal tab Brass Tin plated In-line Plug Insulator Polyamide Black UL94V-0 In-line IDC Contact Contact Phosphor bronze Tin plated or gold plated Insulator Polyamide Black UL94V-0 In-line Adapter Contact Brass Tin plated B208 May.1.2017 Copyright 2017 HIROSE ELECTRIC CO., LTD. All Rights Reserved.