The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. 1mm Pitch SMT Board to Board Connector(Standard Interface Connector Compliant with VESA FPDI-1) DF9 Series Features 1. Compliant with the VESA FPDI-1 Standard Interface Connector The 31 and 41 contact connectors comply with the standard connector specification for the flat panel display interface, which U.S VESA. has selected as FPDI-1. VESA: Video Electronics Standards Association FPDI-1: Flat Panel Display Interface 2. Perfect Mis-insertion Prevention The mating area is designed in a trapezoidal structure, and perfectly prevents the mis-insertion despite the miniature size. 3. Equipped with Easy Lock Mechanism The easy lock mechanism assures the firm insertion and extraction properties as well as the insertion/extraction feeling touch. 4. Smooth Insertion and Extraction Feeling The contact is constructed without the material fragible surface in the contact portion, and provides a smooth insertion and use feeling. 5. Setting Two Type Platings as Standard Two type platings, tin plated and gold plated, are prepared, and either appropriate plating can be selected under cost and use conditions. Structure to Prevent Mis-insertion Lock Mechanism Applications LCD (Liquid Crystal Display), Mobile phone, Note PC A278The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Product Specifications Current rating 0.5A Operating Temperature Range -45 to +125 (Note 1) Storage Temperature Range -10 to +60 (Note 2) Rating Voltage rating150V AC Operating Humidity Range 40 to 80% Storage Humidity Range 40 to 70% Item specification Condition 1. Insulation Resistance 500M ohms min. 100V DC 2. Withstanding voltage No flashover or insulation breakdown. 250V AC/1 minute 3. Contact Resistance 50m ohms max. 100mA 4. Vibration No electrical discontinuity of 1s or more Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 5. Humidity (Steady state) Contact resistance: 50m ohms max. Insulation resistance: 500M ohms min. 96 hours at temperature of 40 and humidity of 90% to 95% 6. Temperature Cycle Contact resistance: 50m ohms max. Insulation resistance: 500M ohms min. (-55: 30 minutes 5 to 35: 10 minutes 85: 30 minutes 5 to 35: 10 minutes) 5 cycles 7. Durability (Mating/un-mating) Contact resistance: 50m ohms max: Tin plating: 30 cycles Gold plating: 100 cycles Reflow: At the recommended temperature profile 8. Resistance to Soldering heat No deformation of components affecting performance. Manual soldering: 300 for 3 seconds Note 1: Includes temperature rise caused by current flow. Note 2: The termstorag refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. Material Product Part Material Finish Remarks Insulator Polyamide Beige UL94V-0 Receptacle/Header Contact Phosphor copper Tin plated or gold plated Metal fitting Brass Tin plating Note:The gold plated product contact area is plated with gold, and lead plated with tin-lead. Ordering Information Please determine the specific product. If needed, please select and order products from the product No. as listed on catalog page A280~A284. Receptacle/Header DF9 - * S - 1 V (**) q wre tyu q Series Name : DF9 r Connector Type w Type S: Receptacle Fitting Boss P: Header Blank KK t Contact Pitch : 1mm A K y Contact Type B K V: Straight SMT C u Contact Surface Finish/Packaging Type e Number of Contacts (22): Tin plated, embossed tape packaging 9 to 25,31,41,51 (59): Gold plated, embossed tape packaging *Refer to page A284 for the bottom entry type (DF9L). A279