75 Micro Coaxial Connector Supporting 12G-SDI D.FL75 Series 75 , up to 12GHz Exterior mating view 6.7 D.FL75-LP(P)-084 D.FL75-R-SMT-1 Fig.1 Features 1. Compact 75 Coaxial Connector Receptacle and plug (right angle) produces a total mating height of only 2.79mm. (Fig. 1) 2. High impedance matching High frequency compatible from DC to 12GHz suitable for 12G-SDI broadcasting equipment. 3. Terminated with 75 , ultra-fine coaxial cable 1.5mm, ultra-fine coaxial (flourinated resin insulated) D.FL75 set image Fig.2 cables allow for connections in limited spaces. 4. Suitable for 12G-SDI broadcasting and video equipment When used with the BNC(75) series plug, 75 system lines are maintained from interface connection to the internal wiring systems. 5. Supports automatic mounting Tape and Reel packaging allows for pick-and-place mounting. 6. Easy mating Compact connector makes a clear tactile click when mated which confirms complete mating. 7. Simple unmating process An extraction tool which simplifies the unmating process is available. 8. Environmental Compatibility Halogen Free Chlorine and bromine above the standard values are not used for receptacle and plug harnesses. *As defined by IEC61249-2-21 Br-900 ppm maximum, Cl-900 ppm maximum, Cl+Br combined-1,500 ppm maximum Applications Broadcasting camera, FA/commercial camera, switcher, medical equipment, large video equipment. Function Diagram Relay adapter Adapter BNC 75 J-D.FL75J-BPA Plug side Plug D.FL75-LP P -084 Receptacle side Receptacle D.FL75-R-SMT-1 In cases where the application will demand a high level of reliability, such as automotive, 1 2020.11 please contact a company representative for further information. 2.79D.FL75 Series75 Micro Coaxial Connector Supporting 12G-SDI Product Speci cations Operating Nominal characteristic impedance : 75 -40 to +105 (RH 90% max.) temperature range Ratings Storage Frequency range : DC to 12GHz -20 to +70 (RH 90% max.) temperature range Items Specifications Conditions 1. Contact resistance Center : 50m max. Outer : 20m max. Measured with 10mA max. 2. Insulation resistance 500 min. Measured with 250V DC 3. Withstanding voltage No flashover or insulation breakdown 300V AC for 1 min. 1.3 max. DC to 3GHz 4. V.S.W.R. ( ) 1.5 max. 3 to 12GHz Insertion force 30N max. 5. Total Insertion/ Measured with applicable connector Extraction force First time : 7N min. Extraction Force 2 to 20 times : 3N min. 6. Durability (insertion/ Contact resistance extraction with Center : 55m max. 20 mating cycles corresponding plug) Outer : 25m max. No electrical discontinuity for 1s or more. Frequency of 10 to 100Hz, single amplitude of 1.5mm, 7. Vibration resistance 2 No damaged, cracks or loose parts. acceleration of 59m/s , for 5 cycles in 3 axial directions. 2 No electrical discontinuity for 1s or more. Acceleration of 735m/s , for a duration of 11 ms, 8. Shock resistance No damaged, cracks or loose parts. sine half-wave waveform, 3 cycles in 6 axial directions. Insulation resistance : 10M min. 9. Humidity resistance (high humidity) 96 hours at temperature of 40 and humidity of 95 (Steady state) Insulation resistance : 500M min. (dry) No damaged, cracked or loose parts. Temperature : -40 +5 to +35 +105 10. Temperature cycle No damaged, cracked or loose parts. +5 to +35 Time : 30 5 max. 30 5 max. (minutes) 5 Cycles Meets voltage standing wave ratio 11. Salt spray 5% salt water solution for 48 consecutive hours (V.S.W.R.) standards *V.S.W.R. Measurement System The above V.S.W.R. speci cation values were measured using the measurement system shown below. Plug harness measurement system Vector Network Analyzer BNC(75)J- D.FL75-LP(P)-084 BNC(75)J- BNC75(M) BNC75(M) Termination D.FL75J-BPA 100mm double-ended harness D.FL75J-BPA D.U.T. Receptacle measurement system Vector Network Analyzer CONVERSION D.FL75- Test board D.FL75- D.FL75-LP(P)-084 BNC(75)J- BNC75(M) BNC75(M) Termination ADP R-SMT-1 FR-4 R-SMT-1 100mm double-ended harness D.FL75J-BPA D.U.T Materials / Finish Product Part Materials Finish/Remarks Shell Phosphor bronze Partially gold plated Plug-right angle Insulator LCP Black, UL94V-0 Female center contact Phosphor bronze Gold plated Shield Phosphor bronze Gold plated Receptacle Insulator LCP Black, UL94V-0 Male center contact Phosphor bronze Gold plated Shell Brass/zinc alloy Nickel plated Adapter Insulator PTFE resin Male center contact Phosphor bronze Gold plated 2