The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. DN SERIES-NEW D SUBMINIATURE INTERFACE CONNECTORS General The DN series are compact, rectangular multi-contact high density circuit designing at reduced cost. connectors developed to meet the demand for smaller Aluminum die-cast shell and Metallic shell areshieledto and slimmer electronic equipment. 2.54 mm grid con- prevent from Electro-Magnetic interference. 20, 26, 36 tact position and Direct dip soldering on PCB enable and 50 way available. Features 1. 2.54 mm grid contact position enable high density 6. Dip soldering connectors are provided with snap circuit designing. clamps for temporarily fixing the connector on the 2. Stable quality due to the contact design based on PCB. our field-proven SM series (D sub-connector). 7. IDC termination types are for standard 1.27 mm pitch 3. One-touch lock system ensures perfect operation. cables, and are available for two types of cables: 4. The cover case uses a thin, low-back compact design AWG26 and AWG28. that meets the needs of high density mounting. It 8. Crimp contact cables from AWG26 through AWG28. can be mounted between 17.78 millimeters (700mil) 9. Allows you to take out the cable vertically or hori- substrates. zontally, as your application requires. 5. The cover case is made of aluminum diecast to shield aginst electromagnetic waves In a combina- tion with a connector metal shell, the cover case is an ideal solution for noise. Application Office Automation, Computers, Communications Equipment, Factory Automation, Home Automation and other commercial applications needing high density interconnections. 169 04/2009The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Specifications and Material Ordering Information (1) Series Number: DN (2) Type 10: Right Angle DIp Type 30: IDC Plug Type (1) (2) (3) (4) (8) 50: Crimp Type (3) No. of Pins: 20, 26, 36 and 50 way (4) P: Plug S: Receptacle (5) Shell CVE1: Angle Cable Exit Shell CV1: Straight Cable Exit Shell (6) Applicable Wire (1) (3) (5) 2628: AWG 26 ~ AWG 28 (7) Type of Contact Pin PC1: Bulk Pin Contact PC2: Chain Pin Contact (8) Specification (50): RoHS compliant (1) (2) (6) (7) Cable specifications N: Pin Pin: AWG 28(7/0.127) AWG 26(7/0.16) 170 04/2009