The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
DN SERIES-NEW D SUBMINIATURE
INTERFACE CONNECTORS
General
The DN series are compact, rectangular multi-contact high density circuit designing at reduced cost.
connectors developed to meet the demand for smaller Aluminum die-cast shell and Metallic shell areshieledto
and slimmer electronic equipment. 2.54 mm grid con- prevent from Electro-Magnetic interference. 20, 26, 36
tact position and Direct dip soldering on PCB enable and 50 way available.
Features
1. 2.54 mm grid contact position enable high density 6. Dip soldering connectors are provided with snap
circuit designing. clamps for temporarily fixing the connector on the
2. Stable quality due to the contact design based on PCB.
our field-proven SM series (D sub-connector). 7. IDC termination types are for standard 1.27 mm pitch
3. One-touch lock system ensures perfect operation. cables, and are available for two types of cables:
4. The cover case uses a thin, low-back compact design AWG26 and AWG28.
that meets the needs of high density mounting. It 8. Crimp contact cables from AWG26 through AWG28.
can be mounted between 17.78 millimeters (700mil) 9. Allows you to take out the cable vertically or hori-
substrates. zontally, as your application requires.
5. The cover case is made of aluminum diecast to
shield aginst electromagnetic waves In a combina-
tion with a connector metal shell, the cover case is
an ideal solution for noise.
Application
Office Automation, Computers, Communications Equipment, Factory Automation, Home Automation and other
commercial applications needing high density interconnections.
169
04/2009
Dec.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved.Nov.1.2016 Copyright 2016 HIROSE ELECTRIC CO., LTD. All Rights Reserved.The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
Specifications and Material
Ordering Information
(1) Series Number: DN
(2) Type
10: Right Angle DIp Type
30: IDC Plug Type
(1) (2) (3) (4) (8)
50: Crimp Type
(3) No. of Pins: 20, 26, 36 and 50 way
(4) P: Plug
S: Receptacle
(5) Shell
CVE1: Angle Cable Exit Shell
CV1: Straight Cable Exit Shell
(6) Applicable Wire
(1) (3) (5)
2628: AWG#26 ~ AWG#28
(7) Type of Contact Pin
PC1: Bulk Pin Contact
PC2: Chain Pin Contact
(8) Specification
(50): RoHS compliant
(1) (2) (6) (7)
Cable specifications
N: Pin
Pin: AWG#28(7/0.127)
AWG#26(7/0.16)
170
04/2009
Nov.1.2016 Copyright 2016 HIROSE ELECTRIC CO., LTD. All Rights Reserved.Dec.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved.