0.5 mm and 1 mm Pitch FPC/FFC Connectors FH12 Series Features Rotating one-touch ZIF mechanism 1. Rotating one-touch ZIF mechanism q The one-touch rotating ZIF mechanism is easier to operate and works with a light force. 2. Clear tactile click A clear tactile click is delivered upon the successful completion of the mating process 3. Supports high density mounting The FH12s one-touch ZIF system requires less space than a slide locking connector and can be mounted in the center of the PCB. 4. Top & Bottom Contact and Vertical w Mount type There are three connection types available: top contact, bottom contact and a Vertical mount. 5. 1 mm pitch product Contact surface of the FPC+FFC In addition to the 0.5 mm pitch connector, we also offer a 1 mm pitch connector. 6. Reinforced actuator The FH12S version in 30, 40, 45, 50, and 53 pin counts are offered with a reinforced actuator that provides an extra measure of security against e actuator breakage. 7. Supports 0.18 mm thick FPC The FH12F version connector supports a 0.18 mm thick FPC (0.05). Double-sided FPC do not require a stiffener when used on the connectors. 2013.11 1FH12 Series0.5mm and 1mm Pitch Connectors For FPC/FFC Product Specifications Current rating: 0.5A DC(Note 1) Operating Temperature Range: 40 to +85 (Note 2) Storage Temperature Range: 10 to +50 (Note 3) Rating Voltage rating: 50V AC Operating Humidity Range:Relative humidity, 90% max. Storage Humidity Range:Relative humidity, 90% max. (Not dewed) (Not dewed) Adaptive FPC/FFC contact specifications t=0.30.05 Gold plated t=0.18 0.05 for FH12F-*S-0.5SH Item Specification Conditions 1. Insulation resistance 500M ohms minimum 100V DC 2. Withstanding voltage No flashover or insulation breakdown. 150V AC/1 minute 3. Contact resistance 50m ohms maximum 1mA Contact resistance: 50m ohms maximum 4. Durability (Insertion/withdrawal) 20 cycles No damage, cracks, or parts dislocation. No electrical discontinuity of 1s or more Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 5. Vibration Contact resistance: 50m ohms maximum. for 10 cycles in 3 axial directions No damage, cracks, or parts dislocation. No electrical discontinuity of 1s or more 2 Acceleration of 981 m/s , 6 ms duaration, 6. Shock Contact resistance: 50m ohms maximum. sine half-wave waveform, 3 cycles in each of the 3 axis No damage, cracks, or parts dislocation. Contact resistance: 50m ohms maximum. 7. Humidity(Steady state) Insulation resistance: 50M ohms minimum. 96 hours at 40 and humidity of 90% to 95% No damage, cracks, or parts dislocation. Contact resistance: 50m ohms maximum. Temperature: -40 / 15 to 35 / 85 / 15 to 35, 8. Temperature Cycle Insulation resistance: 50M ohms minimum. Time: 30 / 2 to 3 / 30 / 2 to 3(minutes) No damage, cracks, or parts dislocation. 5 cycles No deformation of Reflow: At the recommended temperature profile 9.Resistance to Soldering heat Manual soldering: 35010 for 5 seconds components affecting performance. Note 1: When passing the current through all of the contacts,use 70% of the current rating. Note 2: Includes temperature rise caused by current flow. Note 3: The termstorag refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers nonconducting condition of installed connectors in storage, shipment or during transportation. Material Part Material Finish Remarks Polyamide, LCP(60 pos.) Color : Beige Insulator UL94V-0 PPS Color : Dark brown Contact Phosphor bronze Gold plated Metal Fittings Brass Tin plated Ordering Information FH 12 A - 10 (4) S A - 0.5 SH (****) qrw e t y u i o 0 q Series Name : FH y Contact alignment: Single w Series No. : 12 u Eccentric direction: e Blank : standard type Blank : standard type A : Top contact type A : Eccentric type S : Type with strengthed flip-lock actuator i Contacts Pitch : 0.5mm, 1mm F : Type with 0.18mm FPC End Thickness o Contact type r Standard type : Number of contacts SH : SMT horizontal mounting type Eccentric type : Number of contacts in 0.5mm housing SV : SMT vertical mounting type t Standard type : Blank 0 Plating specification Eccentric type : Number of contacts (54) : Selective gold plated (55) : Gold plated (1)(98) : Gold plated 500 pieces/reel 2