17mm 0.5mm pitch, 0.9mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors FH19C & FH19SC Series Actuator color: Brown FH19SC FPC/FFC thickness: 0.30.03mm Actuator color: Black Features 0.9mm high 1. Low-profile 0.5mm pitch FPC/FFC Connectors Miniaturization of portable equipment and personal mobile devices has created increased demand for a low profile, high density, and high reliability connectors. 0.9mm *The design of this connector has been made thinner and smaller, with a height of 0.9mm and width of 3mm. *PCB footprint: Reduced approximately 48% (as compared with Hirose Electric s 0.5mm pitch FH12 Series connectors) *Connector weight: Reduced approximately 78% (as compared with Hirose Electric s 0.5mm pitch FH12 Series connectors) Can be mounted over conductive traces 2. Conductive traces on the PCB can run under the connector All bottom surface of the connector is solid, without any exposure of the contact. 3. Proven Flip-Lock Actuator System assures easy and reliable operation Rotating actuator permits easy insertion and reliable Enclosed construction connection with the FPC & FFC. (No exposed contacts) Tactile sensation confirms complete mechanical locking of Metal fittings the actuator and the electrical connection. (Leadless) 4. Accepts 0.2mm & 0.3mm thick FPC/FFC No exposed contacts on the bottom of the connector. Metal Fittings (Leadless Type) The connector will also terminate with 0.2mm thick Flat Flexible Cable (FFC). No protrusions on the sides allows close side-by-side 5. Board placement with automatic equipment Flat upper surface and tape and reel packaging facilitate board placement. vacuum pick-up and placement. Standard reel packaging contains 5000 connectors. Actuator Temporary Hold Mechanism 6. Halogen-free * (FH19C,FH19SC(11 to 50pos.)) *As defined by IEC61249-2-21 Br-900ppm maximum, Cl-900ppm maximum, Actuator stays open during insertion of the FPC/FFC. 2010.9 1 3mm FH19C & FH19SC Series 0.5mm pitch, 0.9mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors Product Specifications Operating temperature range Storage temperature range ( ) Note1 Current rating 0.5 A + + -55 to 85 (Note 2) -10 to 50 (Note 3) Rating Operating humidity range Storage humidity range Voltage rating 50 V AC Relative humidity 90% max. (No condensation) Relative humidity 90% max. (No condensation) Recommended FH19C Series Thickness: = 0.2 0.03mm Gold plated FPC, FFC FH19SC Series Thickness: = 0.3 0.03mm Gold plated Item Specification Conditions 1. Insulation resistance 500 M ohms min. 100 V DC 2. Withstanding voltage No flashover or insulation breakdown 150 V AC/1 minute 100 m ohms max. 3. Contact resistance 1 mA *Including FPC/FFC conductor resistance 4. Durability Contact resistance: 100 m ohms max. 20 cycles (insertion/ withdrawal) No damage, cracks, or parts dislocation. No electrical discontinuity of 1 s or more. Frequency: 10 to 55 Hz, single amplitude of 5. Vibration Contact resistance: 100 m ohms max. 0.75mm, 10 cycles in each of the 3 directions No damage, cracks, or parts dislocation. No electrical discontinuity of 1 s. min. 2 Acceleration of 981 m/s , 6 ms duration, sine half- 6. Shock Contact resistance: 100 m ohms max. wave waveform, 3 cycles in each of the 3 axis. No damage, cracks, or parts dislocation. Contact resistance: 100 m ohms max. 96 hours at temperature of 40 and humidity of 7. Humidity Insulation resistance: 100 M ohms min. 90 to 95% (Steady state) No damage, cracks, or parts dislocation. + + + + + Temperature: -55 15 to 35 85 15 to 35 Contact resistance: 100 m ohms max. / / / + 8. Temperature cycle Insulation resistance: 100 M ohms min. Time : -30 2 to 3 30 2 to 3(Minutes) / / / No damage, cracks, or parts dislocation. 5 cycles 9. Resistance to Reflow: At the recommended temperature profile No deformation of components affecting performance. soldering heat Manual soldering: 3505 for 5 seconds Note 1: When passing the current through all of the contacts, use 70% of the current rating. Note 2: Includes temperature rise caused by current flow. Note 3: The term storage refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers non- conducting condition of installed connectors in storage, shipment or during transportation.Information Note 4: Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and specifications for a specific part number shown. Materials Part Material Finish Remarks Insulator LCP Color: Beige Color: Brown (FH19C Series) UL94V-0 Actuator PPS/LCP Color: Black (FH19SC Series) Contacts Phosphor bronze Gold plated ------- Metal fittings Phosphor bronze Pure tin reflow plated ------- Ordering information FH 19 C - 30S - 0.5 SH (05) 1 2 3 4 5 6 7 1 Series name : FH 5 Contact pitch : 0.5mm 2 Series No. : 19 Terminal type 6 SH: SMT horizontal mounting type C : FPC/FFC thickness : 0.2mm 3 SC : FPC/FFC thickness : 0.3mm 7 Material and plating specifications : Actuator material PPS LCP Halogen Free 4 No. of contacts : 4 to 50 Contact: Gold plated ------ (05) FH19C YES Contact: Gold plating with nickel barrier ------ (10) FH19SC Contact: Gold plated (05) ------ NO 4 to 10 pos. Contact: Gold plating with nickel barrier (06) ------ FH19SC Contact: Gold plated ------ (05) YES 11 to 50 pos. Contact: Gold plating with nickel barrier ------ (09) 2