0.3mm Contact Pitch, 1.25mm above the board, Flexible Printed Circuit Connectors FH 23 Series Staggered termination configuration. Only 1.25 mm above the board. Leadless type Completely enclosed bottom surface Lead type 1.25mm Features 1. FPC low insertion force and high holding force Hirose Electric s unique low insertion force (LIF) design (patents pending) improves the Flexible Printed Circuit (FPC) holding force after insertion. 2. Temporary hold of FPC There is no need to hold the FPC after insertion in the connector. The connector will hold it in correct position, allowing closing of the actuator. 3. Easy board mounting The surface mounted termination of the contacts is staggered When the actuator is opened on 0.6 mm centers, positioned on front and back of the connector. Bottom of the connector is completely insulated, allowing conductive traces on PCB to run under the connector. 4. Proven Flip-lock Actuator assures easy and reliable operation Rotating actuator permits easy insertion and reliable connection with the FPC. Tactile sensation confirms complete mechanical locking of the actuator and the electrical connection. 5. Variations to suit different mounting areas Available with lead and leadless type of terminations (for opposing FPC insertion side). Temporary hold of FPC 6. Designed for placement with automatic equipment Flat top surface allows pick-up with vacuum nozzles. Packaged in embossed tape, on reel. One reel contains 2,500 pieces. 7. Accepts 0.2mm thick FPC 8. Variety of contact positions Available with 15,17,21,23,25,27,31,33,37,39,45,51,61and 71 pos. 9. Halogen Free The connector does not use chlorine and bromine exceeding standard limits. *Defined in accordance with IEC61249-2-21 When the actuator is closed *Br 900ppm or lower, Cl 900ppm or lower, Br + Cl 1,500ppm or lower 2013.11w 1FH23 Series0.3mm Contact Pitch, 1.25mm above the board, Flexible Printed Circuit Connectors Product Specifications Operating temperature range Storage temperature range Current rating 0.3A -55 to +85 (Note 1) -10 to +50 (Note 2) Ratings Operating humidity range Storage humidity range Voltage rating 30V AC Relative humidity 90% max. (No condensation) Relative humidity 90% max. (No condensation) Recommended FPC Thickness: = 0.20.03mm Gold plated Item Specification Conditions 1. Insulation resistance 50 M ohms min. 100 V DC 2. Withstanding voltage No flashover or insulation breakdown 90 V AC/one minute 100 m ohms max. 3. Contact resistance 1 mA AC *Including FPC/FFC conductor resistance 4. Durability Contact resistance: 100 m ohms max. 10 cycles 4. (insertion / withdrawal) No damage, cracks, or parts dislocation. No electrical discontinuity of 1 s or more. Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 10 5. Vibration Contact resistance: 100 m ohms max. cycles, 3 axis. No damage, cracks, or parts dislocation. No electrical discontinuity of 1 s or more. 2 Acceleration of 981 m/s , 6ms duration, sine half-wave 6. Shock Contact resistance: 100 m ohms max. waveform, 3 cycles, 3 axis. No damage, cracks, or parts dislocation. Contact resistance: 100 m ohms max. 7. Humidity Insulation resistance: 50 M ohms min. 96 hours at 40C and humidity of 90% to 95% (Steady state) No damage, cracks, or parts dislocation. Contact resistance: 100 m ohms max. Temperature:-55/+15 to +35/+85/+15 to +35 8. Temperature cycle Insulation resistance: 50 M ohms min. Time: 30/ 2 to 3 / 30 / 2 to 3 (Minutes) No damage, cracks, or parts dislocation. 5 cycles No deformation of 9. Resistance to Reflow: At the recommended temperature profile soldering heat Manual soldering: 350 5 for 5 seconds components affecting performance. Note 1: Includes temperature rise caused by current flow. Note 2: The term storage refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers non-conducting condition of installed connectors in storage, shipment or during transportation. Materials Part Material Finish Remarks Insulator LCP Color: Beige UL94V-0 Actuator LCP Color: Black Contacts Phosphor bronze Gold plated --------------- Ordering information ) ( FH 23 - 39S - 0.3 SHW 05 1 2 3 4 5 6 Series name : FH Plating specifications : 1 6 2 Series No : 23 (05) : Gold plated (All contact positions except 51 3 Number of contacts : 15 to 71 contacts) 4 Contact pitch: 0.3mm (06) : Gold plated (51 contacts) 5 Terminal type SHW: SMT horizontal mounting type, lead type termination. SHAW: SMT horizontal mounting type, lead-less type termination. 2