FH26W-15S-0.3SHW(99) Hirose

16.8mm 0.3 mm Pitch, 1.0 mm Height FPC Connector FH26 Series Space saving(51 pos. shown) 3.2mm Metal fittings do no protrude outside of the connector body Features Can be mounted over conductive traces. 1. Low-profile 0.3 mm pitch FPC connector Ultra-thin design, 1.0 mm height, 3.2 mm width all add up to a compact, space saving form factor. *30% reduction in PCB footprint *40% reduction in weight (Compared to our 0.3 mm pitch FH23 Series 51 position connector.) 2. Easy PCB Mounting The leads are double sided and have a 0.6 mm mounting No exposed contacts on the bottom of the connector lead pitch to simplify mounting. 3. Fully molded structure aids PCB layout The bottom of this connector is enclosed by a fully molded Operation structure that protects the contacts and removes any (1) Actuator open(1) Actuator open(1) Actuator open(1) Actuator open(1) Actuator open(1) Actuator open(1) Actuator open (1) Actuator open(1) Actuator open(1) Actuator open(1) Actuator open(1) Actuator open(1) Actuator open(1) Actuator open(1) Actuator open(1) Actuator open(1) Actuator open restrictions from PCB patterning and design. (2) Insert FPC(2) Insert FPC(2) Insert FPC(2) Insert FPC(2) Insert FPC(2) Insert FPC(2) Insert FPC (2) Insert FPC(2) Insert FPC(2) Insert FPC(2) Insert FPC(2) Insert FPC(2) Insert FPC(2) Insert FPC(2) Insert FPC(2) Insert FPC(2) Insert FPC 4. Rotating one-touch ZIF mechanism The one-touch rotating ZIF mechanism is easier to operate and ActuatorActuator works with a light force, and a clear tactile click is delivered upon q the successful completion of the mating process 5. Easy FPC insertion The metal FPC insertion guides helps to make this the FPC insertion process easier. w 6. FPC. Accepts standard 0.2 mm thick FPC This connector accepts standard 0.2 mm thick FPC. (The FPCFPC proper FPC stiffener thickness will prevent FPC deformation and ease insertion and mating.) 7. Supports automatic pick-n-place mounting (3) Close the actuator(3) Close the actuator(3) Close the actuator(3) Close the actuator(3) Close the actuator(3) Close the actuator(3) Close the actuator(3) Close the actuator(3) Close the actuator(3) Close the actuator Offered in tape and reel packaging that is compatible with (3) Close the actuator(3) Close the actuator(3) Close the actuator(3) Close the actuator(3) Close the actuator(3) Close the actuator(3) Close the actuator (4) FPC connected(4) FPC connected(4) FPC connected(4) FPC connected(4) FPC connected(4) FPC connected(4) FPC connected(4) FPC connected(4) FPC connected(4) FPC connected (4) FPC connected(4) FPC connected(4) FPC connected(4) FPC connected(4) FPC connected(4) FPC connected(4) FPC connected automatic machine mounting. (5,000 pieces per reel) 8. Halogen-free If you need a Halogen free connector, please use the e FH26W type. All materials and substances used to produce the FH26W Series product complies with Halogen-free standards. * Defined according to IEC61249-2-21 Br: 900ppm max, Cl: 900ppm max, Br+Cl: 1,500ppm max. 9. Multiple packing options r The standard packaging is 5,000 pieces per reel, but it is also offered in a 500 piece reel. (The outer diameter of the reel will be 180 mm in this case.) 2013.11w 1 Apr.1.2016 Copyright 2016 HIROSE ELECTRIC CO., LTD. All Rights Reserved. 1.0mmFH26 Series0.3mm Contact Pitch, 1mm above the board, Flexible Printed Circuit ZIF Connectors Specifications Operating temperature range -55 to +85 (Note 1) Storage temperature range -10 to +50 (Note 2) Current rating 0.2A DC Rating Operating humidity range Relative humidity 90% max. Storage humidity range Relative humidity 90% Voltage rating 30V AC (No condensation) max. Thickness: = 0.20.03mm gold plated Recommended FPC : Item Specification Conditions 1. Insulation resistance 50 M ohms min. 100 V DC No flashover or insulation breakdown. 90 V AC /one minute 2. Withstanding voltage 100 m ohms max. 3. Contact resistance 1 mA * Including FPC conductor resistance 4. Durability Contact resistance: 100 m ohms max. 10 cycles (Insertion/ withdrawal) No damage, cracks, or parts dislocation. No electrical discontinuity of 1s or more. Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 10 cycles, 3 5. Vibration Contact resistance: 100 m ohms max. directions. No damage, cracks, or parts dislocation. No electrical discontinuity of 1s. min. 2 Acceleration of 981 m/s , 6 ms duration, sine half-wave waveform, 6. Shock Contact resistance: 100 m ohms max. 3 cycles in each of the 3 axis No damage, cracks, or parts dislocation. Contact resistance: 100 m ohms max. 7. Humidity Insulation resistance: 50 M ohms min. 96 hours at temperature of 402 and humidity of 90% to 95%. (Steady state) No affect on appearance or performance. Contact resistance: 100 m ohms max. Temperature: -55 /+15 to +35/+85/+15 to +35 8. Temperature cycle Insulation resistance: 50 M ohms min. Time: 30 / 2 to 3 / 30 / 2 to 3 (Minutes) No damage, cracks, or parts looseness. 5 cycles No deformation of components affecting Reflow: At the recommended temperature profile 9. Resistance to soldering heat performance. Manual soldering: 350 +/-10 for 51 seconds Note 1: Includes temperature rise caused by current flow. Note 2: The termstorag refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers non- conducting condition of installed connectors in storage, shipment or during transportation. Materials Part Material Finish Remarks LCP Color: Black UL94V-0 Insulator FH26 series: Deep brown PA UL94HB FH26W series: Light brown --------------- Contacts Gold plating Phosphor bronze --------------- Metalfittings Pure tin reflow plating Ordering information ( ) FH 26 W - 51S - 0.3 SHW 05 1 2 3 4 5 6 7 1 Series name: FH 6 Termination type SHW: SMT horizontal staggered mounting type 2 Series No.: 26 7 Specifications 3 Blank: Standard (10)Gold plating with nickel barrier, 5,000 pieces / reel W: Satisfies halogen-free requirements (99)Gold plating with nickel barrier, 500 pieces / reel (Flame retardance UL94HB). 4 Number of positions: 13 to 71 5 Contact pitch: 0.3mm 2 Apr.1.2016 Copyright 2016 HIROSE ELECTRIC CO., LTD. All Rights Reserved.