16.8mm 0.3mm Contact Pitch, 1mm above the board, Flexible Printed Circuit ZIF Connectors FH26 Series Space saving(51 pos. shown) 3.2mm Metal fittings do no protrude outside of the connector body Features Can be mounted over conductive traces. 1. Extremely light weight The typical version, with all 51 contacts loaded, weights only 0.1 grams. 2. Easy solderability on the PC board No exposed contacts on the bottom The soldering leads are on 0.6 mm pitch, exiting on front of the connector and back of the connector. 3. Conductive traces on the PCB can run under the connector Operation No exposed contacts on the bottom of the connector. (1) Actuator open(1) Actuator open(1) Actuator open(1) Actuator open(1) Actuator open(1) Actuator open(1) Actuator open(1) Actuator open(1) Actuator open(1) Actuator open(1) Actuator open(1) Actuator open (1) Actuator open(1) Actuator open(1) Actuator open(1) Actuator open(1) Actuator open 4. Easy FPC insertion and reliable electrical (2) Insert FPC(2) Insert FPC(2) Insert FPC(2) Insert FPC(2) Insert FPC(2) Insert FPC(2) Insert FPC(2) Insert FPC(2) Insert FPC(2) Insert FPC(2) Insert FPC(2) Insert FPC (2) Insert FPC(2) Insert FPC(2) Insert FPC(2) Insert FPC(2) Insert FPC connection Proven Flip LockR actuator allows easy insertion of FPC. ActuatorActuatorActuator Tactile sensation when fully closed confirms complete q electrical and mechanical connection. 5. Accepts standard thickness FPC 0.2mm thick standard Flexible Printed Circuit board can be used. w This is the only ultra-low profile ZIF connector allowing the use of standard FPC. FPCFPCFPC 6. Board placement with automatic equipment Flat top surface and packaging on the tape-and-reel allows use of vacuum nozzles. (3) Close the actuator(3) Close the actuator(3) Close the actuator(3) Close the actuator(3) Close the actuator (3) Close the actuator(3) Close the actuator(3) Close the actuator(3) Close the actuator(3) Close the actuator(3) Close the actuator(3) Close the actuator(3) Close the actuator(3) Close the actuator(3) Close the actuator(3) Close the actuator(3) Close the actuator Standard reel contains 5,000 connectors. (4) FPC connected(4) FPC connected(4) FPC connected(4) FPC connected(4) FPC connected (4) FPC connected(4) FPC connected(4) FPC connected(4) FPC connected(4) FPC connected(4) FPC connected(4) FPC connected(4) FPC connected(4) FPC connected(4) FPC connected(4) FPC connected(4) FPC connected 7. The connector does not use chlorine and bromine exceeding standard limits. (FH26W series) e * Defined in accordance with IEC61249-2-21 Br 900ppm or lower, Cl 900ppm or lower, Br + Cl 1,500ppm or lower 8. Available for 500 pieces packaging Although the normal product is 5,000 pieces per reel, r 500 winds per reel is also available. (Emboss reel external diameter is 180mm.) 2010.9 1 1.0mm FH26 Series 0.3mm Contact Pitch, 1mm above the board, Flexible Printed Circuit ZIF Connectors Specifications Operating temperature range -55 to +85 (Note 1) Current rating 0.2A DC Storage temperature range -10 to +50 (Note 2) Rating Operating humidity range Relative humidity 90% Voltage rating 30V AC Storage humidity range Relative humidity 90% max. max. (No condensation) Thickness: = 0.20.03mm gold plated Recommended FPC : Item Specification Conditions 1. Insulation resistance 50 M ohms min. 100 V DC 2. Withstanding voltage No flashover or insulation breakdown. 90 V AC /one minute 100 m ohms max. 3. Contact resistance 1 mA * Including FPC conductor resistance 4. Durability Contact resistance: 100 m ohms max. 10 cycles (Insertion/ withdrawal) No damage, cracks, or parts dislocation. No electrical discontinuity of 1 s or more. Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 10 cycles, 3 5. Vibration Contact resistance: 100 m ohms max. directions. No damage, cracks, or parts dislocation. No electrical discontinuity of 1 s. min. 2 Acceleration of 981 m/s , 6 ms duration, sine half-wave waveform, 6. Shock Contact resistance: 100 m ohms max. 3 cycles in each of the 3 axis No damage, cracks, or parts dislocation. Contact resistance: 100 m ohms max. 7. Humidity Insulation resistance: 50 M ohms min. 96 hours at temperature of 402 and humidity of 90% to 95%. (Steady state) No affect on appearance or performance. Contact resistance: 100 m ohms max. Temperature: -55 /+15 to +35/+85/+15 to +35 8. Temperature cycle Insulation resistance: 50 M ohms min. Time: 30 / 2 to 3 / 30 / 2 to 3 (Minutes) No damage, cracks, or parts looseness. 5 cycles Reflow: At the recommended temperature profile 9. Resistance to soldering heat No deformation of components affecting performance. Manual soldering: 350 +/-10 for 51 seconds Note 1: Includes temperature rise caused by current flow. Note 2: The termstorag refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers non- conducting condition of installed connectors in storage, shipment or during transportation. Materials Part Material Finish Remarks LCPColor:Black UL94V-0 Insulator FH26 series: Deep brown PA UL94HB FH26W series: Light brown --------------- Contacts Gold plating Phosphor bronze --------------- Metalfittings Pure tin reflow plating Ordering information ( ) FH 26 W - 51S - 0.3 SHW 05 2 3 1 4 5 6 7 1 6 Series name: FH Termination type SHW: SMT horizontal staggered mounting type 2 Series No.: 26 7 Specifications 3 Blank: Standard (05)Gold plating, 5,000 pieces / reel W: Satisfies halogen-free requirements (10)Gold plating with nickel barrier, 5,000 pieces / reel (Flame retardance UL94HB). (98)Gold plating, 500 pieces / reel 4 Number of positions: 13 to 71 (99)Gold plating with nickel barrier, 500 pieces / reel 5 Contact pitch: 0.3mm 2