0.5 mm and 1 mm Pitch, 2.55 mm Height FPC/FFC Connectors FH28 Series Robust locking structure Reinforced fitting provide support and prevent the actuator from disengaging from the connector. Each terminal is attached to the actuator, so the actuator is supported along its entire length. Features The FPC positioning mechanism and FPC tabs help to 1. Highly reliable connection and robust structure guide and hold the FPC prior to engaging the actuator Multi-polarized connectors, reinforced body structure and high FPC retention produced by the following features: Reliable connection created by its unique FPC/FFC positioning mechanism Prevents accidental disengagement with the design of its proprietary structure 2. Simplified operations The flip lock structure makes it easier to engage/disengage the actuator and reduces the required force needed to operate. A clear tactile click is delivered upon the successful completion of the mating process. 3. Increased FPC/FFC retention force Vertical retention force for the FPC/FFC is 2.5 times stronger than our 0.5 mm pitch connector the FH12 series. Horizontal retention force for the FPC/FFC is 2 times stronger than our 0.5 mm pitch connector the FH12 series *To realize the horizontal retention force values, the use of the FPC positioning tabs are required. FPC without the Can also be used with straight sided, non-tabbed positioning tabs will comply with the specifications rated FPC/FFC on the FH12 series. 4. Accepts standard 0.3 mm thick FPC/FFC It accepts 0.3 mm thick products that are easy to manufacture and have superb insertion performance. 5. Fully molded structure aids PCB layout The bottom of this connector is enclosed by a fully molded structure that protects the contacts and removes any restrictions from PCB patterning and design. 6. Supports automatic pick-n-place mounting Offered in tape and reel packaging that is compatible with automatic machine mounting. (2,000 pieces per reel) 7. Halogen-free All materials and substances used to produce this product comply with Halogen-free standards.*Defined according to IEC61249-2-21. Br: 900 ppm maximum, Cl: 900 ppm maximum, Br+Cl: 1,500 ppm maximum 8. Multiple packing options The standard packaging is 2,000 pieces per reel, but it is also offered in a 500 piece reel. (The outer diameter of the reel will be 330 mm in this case.) 2013.11w 1FH28 Series0.5 mm and 1 mm Pitch, 2.55 mm Height FPC/FFC Connectors Product Specifications Operating Temperature Range Storage Temperature Range Rated Current 0.5 A (Note 1) ~ ~ -40 +85 (Note 2) -10 +50 (Note 3) Ratings Rated Voltage AC 50 Vrms Operating Humidity Range Storage Humidity Range Relative humidity 90% or less (no condensation shouldbe present) Relative humidity 90% or less (no condensation should be present) Adaptive FPC/FFC t= 0.3 0.05 Gold plating contact specifications Item Specification Conditions Minimum of 500 M Measured with DC 100 V 1. Insulation Resistance No flashover or breakdown AC 150 Vrms is applied for one minute. 2. Withstanding Voltage Maximum of 50 m Measured at 1mA (DC or 1,000Hz) 3. Contact Resistance *including FPC/FFC conductor resistance Contact Resistance: Maximum of 50 m 20 mating cycles 4. Durability No damaged, cracked or looseness of parts No electrical discontinuity of 1s or greater Frequency: 10 to 55Hz Contact Resistance: Maximum of 50 m Single amplitude of 0.75mm for 10 cycles in 3 axial 5. Vibration Resistance No damages, cracks and looseness of parts directions No electric discontinuity of 1s or greater 2 Acceleration of 981m/s , 6ms duaration, sine half-wave Contact Resistance: Maximum of 50 m 6. Shock Resistance waveform 3 cycles in each of the 3 axis No damaged, cracked or looseness of parts Contact Resistance: Maximum of 50 m 7. Humidity Resistance Insulation Resistance: Minimum of 50 M 96 hours at temperature: 40 and humidity: 90 to 95% of Steady State No damaged, cracked or looseness of parts Contact Resistance: Maximum of 50 m Temperature: -40 +15 to +35 +85 +15 to +35 / / / Insulation Resistance: Minimum of 50 M 8. Temperature Cycles Time: 30 2 to 3 30 2 to 3 minutes / / / No damaged, cracked or looseness of parts 5 cycles Should not have external deformity or loose Reflow: according to the Recommended Temperature Profile 9. Solder Heat Hand solder: 350 5 for 5 seconds parts Resistance (Note 1) When energizing rated current to all contacts, use 70% of rated current. (Note 2) Includes temperature rise caused by current flow. (Note 3) The termstorag here refers to products stored for a long period prior to board mounting and use. The operating temperature and humidity range covers the non-energized condition of connectors after board mounting and the temporary storage. Materials Component Materials Color/Finish Remarks Gray LCP Insulator UL94V-0 Black LCP Gold plating Contact Phosphor bronze --------------- Metal fitting Brass --------------- Pure tin plating Product Number Structure Refer to this page when determining product specifications by model types. Please place orders with part numbers listed in this catalog. The characteristics and specifications of the product described in this catalog are reference values. Please make sure to check the latest delivery specifications at the time of product use. ( ) ( ) FH 28 D - 50 25 S B - 0.5 SH 05 1 2 3 4 5 6 7 9 10 8 1 Series Name: FH 6 Contact arrangement: Single (single row) 7 Eccentric direction: BlankStandard type (without eccentricity) Series No.: 28 2 BEccentric type (contacts on the opposite side of polarity mark) None, D: Standard type 3 E: Long reinforcing fitting type 8 Contact Pitch: 0.5 mm, 1 mm H: Space-saving type Standard type: The number of contacts 4 9 Mounting direction , SH...SMT horizontal mounting type Eccentric type: Number of contacts in 0.5mm housing Specification: (05) Gold plating, 2,000 pieces per reel 10 Standard type: Blank (10) Specification:Partial gold plating, 2,000 pieces per reel 5 (07)Gold plating (for 40 contact only.), 2,000 pieces per reel Eccentric type: Actual number of pins (98)Gold plating, 500 pieces per reel 2