0.5mm and 1mm Pitch, 2.55mm Height FPC/FFC Connectors FH28 Series Robust locking structure Reinforced fitting provide support and prevent the actuator from disengaging from the connector. Each terminal is attached to the actuator, so the actuator is supported along its entire length. Fig.1 Features The FPC positioning mechanism and FPC tabs help to guide and hold the FPC prior to engaging the actuator 1. Highly reliable connection and robust structure Multi-polarized connectors, reinforced body structure and high FPC retention produced by the following features: Reliable connection created by its unique FPC/FFC positioning mechanism Prevents accidental disengagement with the design of its proprietary structure 2. Simplified operations The flip lock structure makes it easier to engage/disengage the actuator and reduces the required force needed to operate. A clear tactile click is delivered upon the successful completion of the mating process. (Fig.1) 3. Increased FPC/FFC retention force Vertical retention force for the FPC/FFC is 2.5 times stronger than our 0.5mm pitch connector the FH12 series. Horizontal retention force for the FPC/FFC is 2 times stronger than our 0.5mm pitch connector the FH12 series Fig.2 *To realize the horizontal retention force values, the use of the FPC positioning tabs are required. FPC without Can also be used with straight sided, non-tabbed the positioning tabs will comply with the specifications rated on the FH12 series. FPC/FFC 4. Accepts standard 0.3mm thick FPC/FFC It accepts 0.3mm thick products that are easy to manufacture and have superb insertion performance. 5. Fully molded structure aids PCB layout The bottom of this connector is enclosed by a fully molded structure that protects the contacts and removes any restrictions from PCB patterning and design. 6. Supports automatic pick-n-place mounting Offered in tape and reel packaging that is compatible with automatic machine mounting. (2,000pcs/reel) 7. Halogen-free All materials and substances used to produce this product comply with Halogen-free standards.*Defined according to IEC61249-2-21. Br : 900ppm maximum, Cl : 900ppm maximum, Br+Cl : 1,500ppm maximum Fig.3 8. Multiple packing options The standard packaging is 2,000pcs/reel, but it is also offered in a 500pcs/reel. (The outer diameter of the reel will be 330mm in this case.) 1 2019.9 FH28 SeriesFH28 Series0.5mm and 1mm Pitch, 2.55mm Height FPC/FFC Connectors0.5mm and 1mm Pitch, 2.55mm Height FPC/FFC Connectors Product Specifications Operating Temperature Range Storage Temperature Range Rated Current 0.5A (Note 1) -40 to +105 (Note 2) -10 to +50 (Note 3) Ratings Rated Voltage AC 50Vrms Operating Humidity Range Storage Humidity Range Relative humidity 90% or less (no condensation shouldbe present) Relative humidity 90% or less (no condensation should be present) Adaptive FPC/FFC t= 0.3 0.05 Gold plating contact specifications Item Specification Conditions Minimum of 500M Measured with DC 100V 1. Insulation Resistance No flashover or breakdown AC 150Vrms is applied for 1 minute. 2. Withstanding Voltage Maximum of 50m Measured at 1mA (DC or 1,000Hz) 3. Contact Resistance *including FPC/FFC conductor resistance Contact Resistance : Maximum of 50m 20 mating cycles 4. Durability No damaged, cracked or looseness of parts No electrical discontinuity of 1s or greater Frequency : 10 to 55Hz Contact Resistance : Maximum of 50m Single amplitude of 0.75mm for 10 cycles in 3 axial 5. Vibration Resistance No damages, cracks and looseness of parts directions No electric discontinuity of 1s or greater 2 Acceleration of 981m/s , 6ms duaration, sine half-wave Contact Resistance : Maximum of 50m 6. Shock Resistance waveform 3 cycles in each of the 3 axis No damaged, cracked or looseness of parts Contact Resistance : Maximum of 50m 7. Humidity Resistance Insulation Resistance : Minimum of 50M 96 hours at temperature : 40 and humidity : 90 to 95% of Steady State No damaged, cracked or looseness of parts Contact Resistance : Maximum of 50m Temperature : -40 +15 to +35 +105 +15 to +35 / / / Insulation Resistance : Minimum of 50M 8. Temperature Cycles Time : 30/2 to 3/30/2 to 3 minutes No damaged, cracked or looseness of parts 5 cycles Should not have external deformity or loose Reflow : according to the Recommended Temperature Profile 9. Solder Heat Hand solder: 350 5 for 5 seconds parts Resistance Note 1 : When energizing rated current to all contacts, use 70% of rated current. Note 2 : Includes temperature rise caused by current flow. Note 3 : The termstorag here refers to products stored for a long period prior to board mounting and use. The operating temperature and humidity range covers the non-energized condition of connectors after board mounting and the temporary storage. Materials / Finish Component Materials Color/Finish Remarks Gray LCP Insulator UL94V-0 Black LCP Gold plating Contact Phosphor bronze --------------- Metal fitting Brass --------------- Pure tin plating Product Number Structure Refer to the chart below when determining the product specifications from the product number. Please select from the product numbers listed in this catalog when placing orders. ( ) ( ) FH 28 D - 50 25 S B - 0.5 SH 05 1 2 3 4 5 6 7 8 9 10 Series Name : FH Contact arrangement : Single (single row) 1 6 7 Eccentric direction : BlankStandard type (without eccentricity) Series No. : 28 2 BEccentric type (contacts on the opposite side of polarity mark) 3 None, D : Standard type E : Long reinforcing fitting type Contact Pitch : 0.5mm, 1mm 8 H : Space-saving type Standard type : The number of contacts Mounting direction , SH...SMT horizontal mounting type 4 9 Eccentric type : Number of contacts in 0.5mm housing Specification : (05) Gold plating, 2,000 pcs/reel 10 Standard type : Blank (10) Specification:Partial gold plating, 2,000 pcs/reel 5 (07)Gold plating (for 40 contact only.), 2,000 pcs/reel Eccentric type : Actual number of pins (98)Gold plating, 500 pcs/reel 2